
A cam follower is an unmounted bearing with a heavy outer ring that rolls directly on a track, cam or rail, built either on an integral threaded stud or as a yoke roller with a precision bore for a pin. It turns rotation into linear motion or supports a radial or combined load at the point of contact. The category is the McGill line: CAMROL full-complement needle followers in inch and metric sizes, heavy-duty and special-duty versions, corrosion-resistant CRES CAMROL in 400 series stainless, and TRAKROL followers built on ball, tapered or cylindrical rollers for track loads.
Also known as: cam follower bearings, track rollers, yoke rollers, camrol bearings, stud type cam followers
Series in this category
Related guides: Bearing selection guide, Bearing lubrication basics, Cross-reference help
| Specification | What it means |
|---|---|
| Series | Inch CAMROL, metric CAMROL, heavy-duty inch or metric, special duty, CRES or TRAKROL, which sets the construction and the roller type. |
| Roller diameter | The outside diameter of the outer ring in inches or millimeters, which is the size number in the part designation. |
| Rolling element | Full-complement or caged needle rollers on CAMROL, cylindrical, tapered or ball rollers on TRAKROL, or a self-lubricating bushing with no rolling elements on the B prefix series. |
| Stud type | Standard stud, standard stud with eccentric bushing, or heavy stud, which sets the stud diameter and thread for a given roller. |
| Outer ring shape | Cylindrical, crowned, flanged or V-groove outside diameter, matched to the track the follower runs on. |
| Sealing | Sealed with the LUBRI-DISC seal, shielded, or unsealed, which decides how much contamination the bearing tolerates and whether it vents on relubrication. |
| Hex hole or screwdriver slot | The drive provision in the stud end for holding the stud while the nut is tightened, needed where the follower is mounted from one side. |
The inch nomenclature runs prefix, type, suffix, size, options. An optional B prefix means a bushing with no rolling elements and C means a crowned outside diameter; CF, CYR and CFH are the stud, yoke and heavy-stud types; E marks an eccentric bushing; the size is the outside diameter in inches; and the trailing letters add N for a narrow roller, S for a LUBRI-DISC seal, B for a hex hole and CR for stainless. CCFE 1 1/2 SB is a crowned, eccentric, sealed, hex-hole stud follower with a 1 1/2 inch roller.
Both are stud-type CAMROL followers with the same roller sizes. The CFH carries a heavy stud for the same roller outside diameter, for applications that need more stud strength than the standard stud provides. The CFH series runs 1/2 to 7 inch and is not offered with the eccentric bushing.
Yes. CRES CAMROL followers are made with 400 series stainless steel components for resistance to both external and internal corrosion, are dimensionally interchangeable with standard CAMROL followers and are identified by a CR designation in the part number.
When the load is a track load carried on ball, cylindrical or tapered rollers rather than on needles. The TRAKROL PCF and PCYR, FCF and FCYR, and VCF and VCYR series cover 1 1/2 to 9 inch stud rollers and 3 to 7 1/2 inch yoke rollers, with the V-groove VCF and VCYR made for a V-shaped track.