

The chain group is built around ANSI roller chain and the sprockets cut for it, with ISO B-series chain stocked beside the ANSI sizes. Roller chain is listed by chain number, which fixes the pitch, and by strand count. Sprockets are listed by the chain they run, their tooth count and how they mount to the shaft: a Browning bushed sprocket takes a Split Taper bushing, a finished-bore sprocket is bored and keyed to size, and a minimum-bore sprocket is supplied for reboring. Leaf chain sits apart from the drive products, listed by pitch, lacing and minimum tensile strength. Connecting links, offset links and chain tools complete the group.
Also known as: roller chain and sprockets, power transmission chain, drive chain, chain drives
Series in this category
Related guides: Cross-reference help
| Specification | What it means |
|---|---|
| Chain number | The size designation, such as 40, 80 or 08B, which fixes the pitch and the standard the chain and its sprockets are built to. |
| Chain pitch | Distance between adjacent pin centers, from 1/4 inch to 2 1/2 inches across the stocked ANSI sizes. |
| Number of strands | How many rows of rollers run side by side. Chain is stocked in one to six strands; sprockets in single and double. |
| Number of teeth | Teeth on the sprocket. With the mating sprocket it sets the drive ratio, and with the pitch it sets the pitch diameter. |
| Bore type or mounting style | Bushed for a Split Taper bushing, finished bore with keyway, or minimum plain bore for reboring. |
| Pitch diameter and outside diameter | The working diameter at the chain pins, and the diameter over the tooth tips that the guard has to clear. |
| Material | Steel, steel with hardened teeth, or stainless steel for chain and sprockets that run wet or washed down. |
Any sprocket listed for No. 60, 3/4 inch pitch ANSI chain, in the strand count the drive uses. Within that set the choice is tooth count for the ratio, then mounting style: a bushed sprocket with the right Split Taper bushing for the shaft, a finished bore in the shaft size, or a minimum bore for machining.
Yes. The sprocket has to carry two rows of teeth at the chain's strand spacing, and sprocket listings state single or double strand for that reason. A single-strand sprocket under a double-strand chain engages one row only and leaves the other unsupported.
A bushed sprocket has a hub that accepts a Browning Split Taper bushing, ordered separately in the shaft size, so the sprocket itself is stocked without a finished bore. A finished-bore sprocket is supplied bored and keyed to one shaft size and mounts directly on the shaft.
No. Leaf chain is not listed against a sprocket; it is a tension member rated by minimum tensile strength and sized by pitch, plate lacing, plate thickness and pin diameter. The BL634, BL666, BL834 and BL866 listings run from 17,000 to 57,000 pounds minimum tensile strength.