Browning 1TB52
SPLIT TAPER B SHEAVES-600
Product Type
Multiple Sheaves
Material
Cast Iron
Datum Diameter (A)
4.8
Outside Diameter (in)
5.55
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub.
- Combination Groove - All Browning B Sheaves permit the running of A& B Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
| Part Number | 1001726 |
| Brand | Browning |
| Material | Cast Iron |
| Datum Diameter (A) | 4.8 |
| Outside Diameter (in) | 5.55 |
| Datum Diameter (B) | 5.2 |
| Model Name | 1TB-M_Sheave_Master |
| Overall Length (in) | 2.1406 |
| Number of Grooves | 1 |
| Pitch Diameter (A) | 5 |
| Bushing Used | P1 |
| Pulley Material | Cast Iron |
| Pitch Diameter (B) | 5.5 |
| Product Type | Multiple Sheaves |
| Bore (Min) (in) | 0.5 |
| Belt Section | A, B |
| Bore Type | Split Taper Bushed |
| Number of Hubs | 1 |
| Bore Code | P1 |
| Overall Width (in) | 2.14 |
| Face Width (in) | 1 |
| Keyway Size | 0.375 |
| Bushing Bore Range | .500 - 1.750 |
| Pulley Construction | Solid |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Browning |
| Mfg. Catalog Numberi | 1TB52 |
| Mfg. Part Numberi | 1001726 |
| GDS #i | GDS-100811 |
| Categoryi | Power Transmission / V-Belt Sheaves |
| UPCi | 662289301454 |
Related Products
Replaces Legacy Parts
This product is a direct replacement for the following discontinued part numbers. Customers searching for these legacy SKUs will find this page.
- 1003920Browning 1B52SDSDiscontinued