FHP Sheaves
Browning 1VP44X7/8
VL VM VP SHEAVES-600
1VP44 is also available as
Product Type
FHP Variable Pitch Sheaves
Material
Cast Iron
Turns Open (B or 5L) (For Min PD)
6
Turns Open (A or 4L) (For Min PD)
5
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Largest selection in the Industry - Browning offers the widest range of variable speed sheaves in the market today. One and two Groove product are available in 1.6" to 8.5" covering up to 25 horsepower.
- VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore.
- The male section with threaded barrel has flat surfaces at 180 degree increments that allow a flat surface for the setscrew to mate with.
- When discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed.
- When discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed.
- Material
- Cast Iron
- Turns Open (B or 5L) (For Min PD)
- 6
- Turns Open (A or 4L) (For Min PD)
- 5
- Turns Open (B or 5L) (For Max PD)
- 1
- Type of Bore
- Finished
- Number of Grooves
- 1
- Turns Open (3L) (For Min PD)
- 4
- Outside Diameter (in)
- 4.15
- Belt Section
- 3L, 4L or A, 5L or B
- Product Type
- FHP Variable Pitch Sheaves
- Bore (in)
- 0.875Shaft size chart
- Pitch Diameter (3L) (Min)
- 2.7
- Pitch Diameter (3L) (Max)
- 3.5
- Keyway Size
- 3/16 x 3/32
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- 1VP44X7/8
- Mfg. Part Numberi
- 1045376
- GDS #i
- GDS-102484
- Categoryi
- FHP Sheaves
- UPCi
- 662289104963
- Bore Codei
- ARO
1VP44 options
| Part # | Measurement | Configuration | Price | View |
|---|---|---|---|---|
| 1VP44X1/2 | Imperial | 1/2-inch bore | $94.09 | View |
| 1VP44X5/8 | Imperial | 5/8-inch bore | $74.95 | View |
| 1VP44X3/4 | Imperial | 3/4-inch bore | $113.64 | View |
| 1VP44X7/8This part | Imperial | 7/8-inch bore | $103.98 | |
| 1VP44X1 | Imperial | 1-inch bore | $157.71 | View |
| 1VP44X 1 1/8 | Imperial | 1-1/8-inch bore | $103.98 | View |
| 1VP44X 1 1/8 CLEAR PK | Imperial | — | $128.04 | View |
| 1VP44X14MM | Metric | 14 mm bore | $171.79 | View |
| 1VP44X19MM | Metric | 19 mm bore | $222.91 | View |
| 1VP44X24MM | Metric | 24 mm bore | $134.91 | View |
| 1VP44X28MM | Metric | 28 mm bore | $113.32 | View |
Common Questions
Are volume discounts available for the 1VP44X7/8?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning 1VP44X7/8, manufacturer article number 1045376. Its UPC is 662289104963.
