Home / Categories / Belts, Sheaves & Pulleys / Sheaves & Pulleys / Synchronous Belt Pulleys / 20H150SH
Synchronous Belt Pulleys
Browning 20H150SH
QD GEARBELT PULLEYS-500
Product Type
Gearbelt Pulley
Material
Steel
Number of Teeth
20
Part Width (mm)
38.1
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Constant Speed - No slip; no creep; minimum backlash due to the positive engagement of the belt teeth with the grooves of the sprockets.
- Light Weight - High horsepower-to-weight ratio makes Browning Gearbelt drives ideal for any application where weight is a factor.
- Broad depth of product to choose from - Browning offers 5 different sprocket pitches along with a wide range of sprocket and belt widths to accommodate any horsepower requirement.
- Different Mounting to the shaft - Browning offers the Gearbelt Pulleys in various ways to mount to the shaft; Split Taper and QD Bushing styles, as well as, finished and minimum plain bore.
- Material
- Steel
- Width (mm)
- 38.1 mm
- Bore Range
- 1/2 to 1 5/8
- Number of Teeth
- 20
- Product Type
- Gearbelt Pulley
- Bore (Max) (in)
- 1.625
- Bore (Min) (in)
- 0.5
- Bore Type
- Bushed Bore
- Mounting Style
- QD Bushing
- Flange (in)
- 3.42 in
- Belt Section
- H
- Outside Diameter (in)
- 3.129 in
- Inside Diameter (in)
- 1.7813 in
- Outside Diameter (mm)
- 79.4766 mm
- Pitch Diameter (in)
- 3.183 in
- Width (in)
- 1.5 in
- Face Width
- 1.312
- Pulley Construction
- Solid
- Number of Hubs
- 1
- Length Through Bore
- 1.2
- With Flanges
- With Flanges
- Hub Projection
- 0.95
- Overall Length (in)
- 2.2622 in
- Hub Diameter (in)
- 2.7 in
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- 20H150SH
- Mfg. Part Numberi
- 3513918
- GDS #i
- GDS-112614
- Categoryi
- Synchronous Belt Pulleys
- UPCi
- 662289346455
- Country of Origini
- United States of America
Documents & Support
- Installation ManualView
Common Questions
What is the outside diameter of the 20H150SH?
The 20H150SH has a outside diameter of 3.129 in. The specification table above lists every published dimension for this part.
Are volume discounts available for the 20H150SH?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
What is the minimum order quantity for the 20H150SH?
The minimum order quantity for the 20H150SH is 10 units.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning 20H150SH, manufacturer article number 3513918. Its UPC is 662289346455.
