Browning 2BK65X1
FHP CI F/B SHEAVES
This part has been discontinued.
An alternative is available — .
Product Type
FHP - Finished Bore
Material
Cast Iron
Number of Grooves
2
Bore Code
AUD
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration. 1 and 2 Grooves are available to meet any fractional horsepower requirement.
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
| Part Number | 1033810 |
| Brand | Browning |
| Material | Cast Iron |
| Number of Grooves | 2 |
| Bore Code | AUD |
| Set Screw Tightening Torque | 165 |
| Outside Diameter (in) | 6.25 in |
| Model Name | 2BK_Sheave_Master2 |
| Pitch Diameter (B) | 6.2 |
| Pitch Diameter (A) | 5.7 |
| Bore (in) | 1 in |
| Product Type | FHP - Finished Bore |
| Belt Section | 4L or A, 5L or B |
| Bore Type | Finished with Keyway and SS |
| Keyway Size | .250 |
| Face Width (in) | 1.75 |
| Pulley Construction | Spoked |
| Overall Width (in) | 2.2188 |
| Set Screw Thread | 5/16-18UNC-3AX3/8 |
| Set Screw Tightening Torque (in-lb) | 165 |
| HTC | 8483.50.9040 |
| Country of Origin | Mexico |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Browning |
| Mfg. Catalog Numberi | 2BK65X1 |
| Mfg. Part Numberi | 1033810 |
| GDS #i | GDS-102322 |
| Categoryi | Power Transmission / FHP Sheaves |
| UPCi | 662289271412 |
