FHP Sheaves
Browning 2BK80H
FHP CI H BORE SHEAVES
2BK80 is also available as
Product Type
FHP - Bushed
Material
Cast Iron
Datum Diameter (A)
7
Pitch Diameter (A)
7.2
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A& B Combination (A/B) configuration. 1& 2 Grooves are available to meet any fractional horsepower requirement.
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance.
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B& 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
- Material
- Cast Iron
- Datum Diameter (A)
- 7
- Pitch Diameter (A)
- 7.2
- Pitch Diameter (B)
- 7.7
- Type of Bore
- Bushed
- Number of Grooves
- 2
- Datum Diameter (B)
- 7.4
- Outside Length (in)
- 1.75
- Bore (Min) (in)
- 0.375
- Outside Diameter (in)
- 7.75
- Belt Section
- 4L or A, 5L or B
- Product Type
- FHP - Bushed
- Bore Type
- Split Taper Bushed
- Pulley Construction
- Plain
- Bushing Bore Range
- 0.375 - 1.500
- Face Width (in)
- 1.75
- Overall Width (in)
- 1.75
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- 2BK80H
- Mfg. Part Numberi
- 1043108
- GDS #i
- GDS-102460
- Categoryi
- FHP Sheaves
- UPCi
- 662289252848
- Bore Codei
- H
2BK80 options
| Part # | Configuration | Price | View |
|---|---|---|---|
| 2BK80X3/4 | 3/4-inch bore | $739.79 | View |
| 2BK80X1 | 1-inch bore | $544.36 | View |
| 2BK80X 1 1/8 | 1-1/8-inch bore | $554.85 | View |
| 2BK80X 1 3/16 | 1-3/16-inch bore | $250.12 | View |
| 2BK80X 1 3/8 | 1-3/8-inch bore | $297.73 | View |
| 2BK80X 1 7/16 | 1-7/16-inch bore | $293.44 | View |
| 2BK80HThis part | Bored for a Split Taper H bushing | $159.27 |
Common Questions
Are volume discounts available for the 2BK80H?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning 2BK80H, manufacturer article number 1043108. Its UPC is 662289252848.
Related Products
Replaces Legacy Parts
This product is a direct replacement for the following discontinued part numbers.
- 1032655Browning 2AK74X 1 7/16Discontinued
- 1033901Browning 2BK80X3/4Discontinued
- 1033927Browning 2BK80X1Discontinued
- 3195898Browning 2BK80X 1 1/8Discontinued