Home / Categories / Belts, Sheaves & Pulleys / Sheaves & Pulleys / Synchronous Belt Pulleys / 30H100SD
Synchronous Belt Pulleys
Browning 30H100SD
QD GEARBELT PULLEYS-500
This part has been discontinued.
An alternative is available — .
Product Type
Gearbelt Pulley
Material
Steel
Number of Teeth
30
Part Width (mm)
25.4
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Constant Speed - No slip; no creep; minimum backlash due to the positive engagement of the belt teeth with the grooves of the sprockets.
- Light Weight - High horsepower-to-weight ratio makes Browning Gearbelt drives ideal for any application where weight is a factor.
- Broad depth of product to choose from - Browning offers 5 different sprocket pitches along with a wide range of sprocket and belt widths to accommodate any horsepower requirement.
- Different Mounting to the shaft - Browning offers the Gearbelt Pulleys in various ways to mount to the shaft; Split Taper and QD Bushing styles, as well as, finished and minimum plain bore.
- Material
- Steel
- Bore Range
- 1/2 to 2
- Number of Teeth
- 30
- Product Type
- Gearbelt Pulley
- Width (mm)
- 25.4 mm
- Bore (Max) (in)
- 2
- Bore (Min) (in)
- 0.5
- Mounting Style
- QD Bushing
- Bore Type
- Bushed Bore
- Width (in)
- 1 in
- Pitch Diameter (in)
- 4.775 in
- Outside Diameter (mm)
- 119.9134 mm
- Inside Diameter (in)
- 3.75 in
- Flange (in)
- 5.0000 in
- Belt Section
- H
- Outside Diameter (in)
- 4.721 in
- Face Width
- 1.312
- Hub Projection
- 0.95
- Pulley Construction
- Solid
- Overall Length (in)
- 2.2622 in
- Number of Hubs
- 1
- Length Through Bore
- 1.83
- With Flanges
- With Flanges
- Hub Diameter (in)
- 3.13 in
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- 30H100SD
- Mfg. Part Numberi
- 3513652
- GDS #i
- GDS-112595
- Categoryi
- Synchronous Belt Pulleys
- UPCi
- 662289349579
- Country of Origini
- United States of America
Common Questions
Has the Browning 30H100SD been discontinued?
Yes. Browning has discontinued the 30H100SD. The manufacturer's direct replacement is the 30HH100, which can be ordered from this page.
What is the outside diameter of the 30H100SD?
The 30H100SD has a outside diameter of 4.721 in. The specification table above lists every published dimension for this part.
Are volume discounts available for the 30H100SD?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning 30H100SD, manufacturer article number 3513652. Its UPC is 662289349579.
