Browning 5TB42
SPLIT TAPER B SHEAVES-600
Product Type
Multiple Sheaves
Material
Cast Iron
Datum Diameter (B)
4.2
Pulley Material
Cast Iron
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub.
- Combination Groove - All Browning B Sheaves permit the running of A& B Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
| Part Number | 1001460 |
| Brand | Browning |
| Material | Cast Iron |
| Datum Diameter (B) | 4.2 |
| Pulley Material | Cast Iron |
| Bushing Used | P2 |
| Datum Diameter (A) | 3.8 |
| Number of Grooves | 5 |
| Overall Length (in) | 4.8281 |
| Pitch Diameter (B) | 4.5 |
| Pitch Diameter (A) | 4 |
| Model Name | 5TB-S_Sheave_Master |
| Outside Diameter (in) | 4.55 |
| Belt Section | A, B |
| Bore (Min) (in) | 0.75 |
| Product Type | Multiple Sheaves |
| Bore Type | Split Taper Bushed |
| Bore Code | P2 |
| Overall Width (in) | 4.875 |
| Face Width (in) | 4 |
| Bushing Bore Range | 0.750 - 1.750 |
| Pulley Construction | Plain |
| Keyway Size | .375 |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Browning |
| Mfg. Catalog Numberi | 5TB42 |
| Mfg. Part Numberi | 1001460 |
| GDS #i | GDS-100787 |
| Categoryi | Power Transmission / V-Belt Sheaves |
| UPCi | 662289211258 |
Related Products
Replaces Legacy Parts
This product is a direct replacement for the following discontinued part numbers. Customers searching for these legacy SKUs will find this page.
- 1005164Browning 5B42SDDiscontinued