Browning 6B94R
SPLIT TAPER B SHEAVES-600
Product Type
Multiple Sheaves
Material
Cast Iron
Datum Diameter (A)
9
Overall Length (in)
4.75
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub.
- Combination Groove - All Browning B Sheaves permit the running of A& B Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
| Part Number | 1011055 |
| Brand | Browning |
| Material | Cast Iron |
| Datum Diameter (A) | 9 |
| Overall Length (in) | 4.75 |
| Pitch Diameter (B) | 9.7 |
| Pulley Material | Cast Iron |
| Pitch Diameter (A) | 9.2 |
| Number of Grooves | 6 |
| Bushing Used | R1 |
| Datum Diameter (B) | 9.4 |
| Outside Diameter (in) | 9.75 |
| Bore (Min) (in) | 1.125 |
| Belt Section | A, B |
| Product Type | Multiple Sheaves |
| Bore Type | Split Taper Bushed |
| Bore Code | R1 |
| Keyway Size | .750 |
| Overall Width (in) | 4.75 |
| Face Width (in) | 4.75 |
| Pulley Construction | Webbed |
| Bushing Bore Range | 1.125 - 3.750 |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Browning |
| Mfg. Catalog Numberi | 6B94R |
| Mfg. Part Numberi | 1011055 |
| GDS #i | GDS-101408 |
| Categoryi | Power Transmission / V-Belt Sheaves |
| UPCi | 662289144907 |
Related Products
Replaces Legacy Parts
This product is a direct replacement for the following discontinued part numbers. Customers searching for these legacy SKUs will find this page.
- 1005677Browning 6B94SFDiscontinued