Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub.
Combination Groove - All Browning B Sheaves permit the running of A and B Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
Product details
Specifications
Material
Cast Iron
Overall Length (in)
6.2969 in
Pitch Diameter (A)
9.2
Pitch Diameter (B)
9.7
Number of Grooves
8
Outside Diameter (in)
9.75 in
Datum Diameter (A)
9
Datum Diameter (B)
9.4
Pulley Material
Cast Iron
Product Type
Multiple Sheaves
Bore (Min) (in)
1.375 in
Belt Section
A, B
Bore Type
Split Taper Bushed
Pulley Construction
Webbed
Bushing Bore Range
1.375 - 3.625
Overall Width (in)
6.2813
Face Width (in)
6.25
Keyway Size
.750
Always verify dimensions, load ratings, material, and seal type before ordering.
Identification
BrandiManufacturer or product brand
Browning
Mfg. Catalog NumberiManufacturer catalog number
8B94R
Mfg. Part NumberiManufacturer part number
1011063
GDS #iGDS internal part number
GDS-101409
CategoryiCatalog classification
V-Belt Sheaves
UPCiUniversal Product Code
662289104956
Bushing UsediBushing designation this part is bored for
R2
Bore CodeiManufacturer ordering code for the bore
R2
Country of OriginiWhere this part is manufactured
Mexico
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
The 8B94R has a outside diameter of 9.75 in. The specification table above lists every published dimension for this part.
Are volume discounts available for the 8B94R?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning 8B94R, manufacturer article number 1011063. Its UPC is 662289104956.