Browning AK109X3/4
FHP CI F/B SHEAVES
This part has been discontinued.
An alternative is available — .
Product Type
FHP - Finished Bore
Material
Cast Iron
Bore Code
AWA
Number of Grooves
1
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration. 1 and 2 Grooves are available to meet any fractional horsepower requirement.
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance.
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
| Part Number | 1027499 |
| Brand | Browning |
| Material | Cast Iron |
| Bore Code | AWA |
| Number of Grooves | 1 |
| Set Screw Tightening Torque | 165 |
| Pitch Diameter (A) | 10.7 |
| Datum (3L) | 10.16 |
| Outside Diameter (in) | 10.75 in |
| Model Name | AK_Sheave_Master3 |
| Warning | Do not use these "AK" sheaves with bores 1" and under with gripnotch belt ratings. |
| Bore (in) | 0.75 in |
| Product Type | FHP - Finished Bore |
| Belt Section | 4L or A, 3L |
| Bore Type | Finished with Keyway and SS |
| Pulley Construction | Spoked |
| Keyway Size | .1875 |
| Overall Width (in) | 1.4688 |
| Face Width (in) | 0.75 |
| Set Screw Tightening Torque (in-lb) | 165 |
| Set Screw Thread | 5/16-18UNC-3AX3/8 |
| HTC | 8483.50.9040 |
| Country of Origin | Mexico |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Browning |
| Mfg. Catalog Numberi | AK109X3/4 |
| Mfg. Part Numberi | 1027499 |
| GDS #i | GDS-101960 |
| Categoryi | Power Transmission / FHP Sheaves |
| UPCi | 662289267286 |
