FHP Sheaves
Browning AK71X5/8
FHP CI F/B SHEAVES
AK71 is also available as
This part has been discontinued.
An alternative is available — .
Product Type
FHP - Finished Bore
Material
Cast Iron
Bore Code
AXI
Set Screw Tightening Torque
165
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration. 1 and 2 Grooves are available to meet any fractional horsepower requirement.
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance.
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
- Material
- Cast Iron
- Set Screw Tightening Torque
- 165
- Datum (3L)
- 6.36
- Pitch Diameter (A)
- 6.9
- Number of Grooves
- 1
- Outside Diameter (in)
- 6.95 in
- Bore (in)
- 0.625 inShaft size chart
- Belt Section
- 4L or A, 3L
- Product Type
- FHP - Finished Bore
- Bore Type
- Finished with Keyway and SS
- Keyway Size
- .1875
- Face Width (in)
- 0.75
- Pulley Construction
- Spoked
- Overall Width (in)
- 1.4688
- Set Screw Tightening Torque (in-lb)
- 165
- Set Screw Thread
- 5/16-18UNC-3AX3/8
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- AK71X5/8
- Mfg. Part Numberi
- 3195211
- GDS #i
- GDS-111949
- Categoryi
- FHP Sheaves
- UPCi
- 662289591190
- Bore Codei
- AXI
- Country of Origini
- Mexico
AK71 options
Common Questions
Has the Browning AK71X5/8 been discontinued?
Yes. Browning has discontinued the AK71X5/8. The manufacturer's direct replacement is the AK71H, which can be ordered from this page.
What is the outside diameter of the AK71X5/8?
The AK71X5/8 has a outside diameter of 6.95 in. The specification table above lists every published dimension for this part.
Are volume discounts available for the AK71X5/8?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning AK71X5/8, manufacturer article number 3195211. Its UPC is 662289591190.
