Browning AK99X3/4
FHP CI F/B SHEAVES
This part has been discontinued.
An alternative is available — .
Product Type
FHP - Finished Bore
Material
Cast Iron
Model Name
AK_Sheave_Master3
Warning
Do not use these "AK" sheaves with bores 1" and under with gripnotch belt ratings.
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A& B Combination (A/B) configuration. 1& 2 Grooves are available to meet any fractional horsepower requirement.
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance.
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
| Part Number | 1027390 |
| Brand | Browning |
| Material | Cast Iron |
| Model Name | AK_Sheave_Master3 |
| Warning | Do not use these "AK" sheaves with bores 1" and under with gripnotch belt ratings. |
| Number of Grooves | 1 |
| Pitch Diameter (A) | 9.7 |
| Datum (3L) | 9.16 |
| Outside Diameter (in) | 9.75 |
| Bore (in) | 0.75 |
| Product Type | FHP - Finished Bore |
| Belt Section | 4L or A, 3L |
| Bore Type | Finished with Keyway and SS |
| Bore Code | AXR |
| Keyway Size | .1875 |
| Pulley Construction | Spoked |
| Overall Width (in) | 1.4688 |
| Face Width (in) | 0.75 |
| Set Screw Tightening Torque | 165 |
| Set Screw Thread | 5/16-18UNC-3AX3/8 |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Browning |
| Mfg. Catalog Numberi | AK99X3/4 |
| Mfg. Part Numberi | 1027390 |
| GDS #i | GDS-101952 |
| Categoryi | Power Transmission / FHP Sheaves |
| UPCi | 662289297160 |
