Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A& B Combination (A/B) configuration. 1& 2 Grooves are available to meet any fractional horsepower requirement.
Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance.
Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B& 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
Product details
Specifications
Material
Cast Iron
Type of Bore
Bushed
Pitch Diameter (A)
18.2
Number of Grooves
1
Datum Diameter (A)
18
Datum Diameter (B)
18.4
Pitch Diameter (B)
18.7
Outside Diameter (in)
18.75
Belt Section
4L or A, 5L or B
Outside Length (in)
1.5625
Product Type
FHP - Bushed
Bore (Min) (in)
0.375
Bore Type
Split Taper Bushed
Overall Width (in)
1.5625
Pulley Construction
Plain
Face Width (in)
0.875
Bushing Bore Range
0.375 - 1.500
Always verify dimensions, load ratings, material, and seal type before ordering.
Identification
BrandiManufacturer or product brand
Browning
Mfg. Catalog NumberiManufacturer catalog number
BK190H
Mfg. Part NumberiManufacturer part number
1042704
GDS #iGDS internal part number
GDS-102420
CategoryiCatalog classification
FHP Sheaves
UPCiUniversal Product Code
662289282494
Bore CodeiManufacturer ordering code for the bore
H
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Part numbers from other manufacturers that are interchangeable with Browning BK190H. Pick a brand, or check a number.
Maska 5
MB188X 1 1/4
MB188X 1 3/16
MB188X 1 7/16
MB188X1
MBL187
Grainger 1
3X610
Your number not listed? Ask us to cross it and we will confirm an equivalent and quote it.
Other manufacturers’ names and part numbers identify interchangeable products only; GDS Supply is not affiliated with them. Confirm critical dimensions before ordering.
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning BK190H, manufacturer article number 1042704. Its UPC is 662289282494.