Browning BK72H
Browning 1 Groove Cast Iron FHP - Bushed Sheave
Product Type
FHP - Bushed
Material
Cast Iron
Bore Code
H
Datum Diameter (B)
6.6
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A& B Combination (A/B) configuration. 1& 2 Grooves are available to meet any fractional horsepower requirement.
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance.
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible.
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B& 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A and B Combination (A/B) configuration. 1 and 2 Grooves are available to meet any fractional horsepower requirement.
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers.
- Material
- Cast Iron
- Datum Diameter (B)
- 6.6
- Number of Grooves
- 1
- Datum Diameter (A)
- 6.2
- Type of Bore
- Bushed
- Pitch Diameter (A)
- 6.4
- Pitch Diameter (B)
- 6.9
- Product Type
- FHP - Bushed
- Outside Diameter (in)
- 6.95 in
- Outside Length (in)
- 1.5625 in
- Belt Section
- 4L or A, 5L or B
- Bore (Min) (in)
- 0.375 in
- Bore Type
- Split Taper Bushed
- Bushing Bore Range
- 0.375 - 1.500
- Face Width (in)
- 0.875
- Overall Width (in)
- 1.5625
- Pulley Construction
- Plain
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- BK72H
- Mfg. Part Numberi
- 1042548
- GDS #i
- GDS-102404
- Categoryi
- FHP Sheaves
- UPCi
- 662289316144
- Bore Codei
- H
- Model Namei
- BKH_Sheave_Master
Common Questions
What is the outside diameter of the BK72H?
The BK72H has a outside diameter of 6.95 in. The specification table above lists every published dimension for this part.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning BK72H, manufacturer article number 1042548. Its UPC is 662289316144.
Related Products
Replaces Legacy Parts
This product is a direct replacement for the following discontinued part numbers. Customers searching for these legacy SKUs will find this page.
- 3195583Browning BK72X 1 1/8Discontinued