Torque Limiters
Browning TP20X7/8
TORQ/PRO
Product Type
Torq Pro Torque Limiter
Torque [Min] (N-m)
9.605
Unit Accuracy
0.1
Clutch size code
20
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Browning Torq/ Pro overload load clutch is release type ball detent style with single position reset
- Accuracy of trip torque within 10% with max torque range 5270 ft/lbs. Easy torque setting and adjusting by tightening or loosing adjusting nuts (bolts)
- Torque [Min] (N-m)
- 9.605
- Unit Accuracy
- 0.1
- Clutch size code
- 20
- Nominal Bore (in)
- 0.875 in
- Series / Model
- TP20
- Reset Type
- Automatic
- Nut Diameter (in)
- 1.89 in
- Bore Size (mm)
- 22.225 mmShaft size chart
- Recovery Style
- Jog
- Bore Shape
- Straight Bore
- Disconnect Method
- Ball Detent
- Detection Method
- Ball Detent
- Number of Bolt Holes
- 4
- Bore Size (in)
- 0.875 inShaft size chart
- Speed Limit
- 700
- Hub Diameter (in)
- 1.18 in
- Total Length (mm)
- 46.99 mm
- Disc Spring Color
- Orange
- Bolt Hole Thread Size (in)
- 10 | 24 in
- Outside Diameter (mm)
- 88.9 mm
- Backlash
- Small
- Spring Diameter
- 2.13
- Total Length (in)
- 1.85 in
- Outside Diameter (in)
- 3.5 in
- Mounting Bolt Circle Diameter
- 3
- Type
- Torque Overload Devices
- Torq/Pro Sprockets
- STP20
- Sensor Travel
- 0.07
- Sensor Plate
- Yes
- Torque Capacity [Min] (lb-ft)
- 7.0833
- Product Type
- Torq Pro Torque Limiter
- Bore (Max) (in)
- 0.875 in
- Flange Diameter (in)
- 2.44 in
- Torque [Max] (N-m)
- 45.2
- Torque Capacity [Max] (lb-ft)
- 33.3333
- Max RPM
- 700
- Torque Capacity [Min] (in-lb)
- 85
- Torque Capacity [Max] (in-lb)
- 400
- Bore (Min) (in)
- 0.875 in
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- TP20X7/8
- Mfg. Part Numberi
- 187765
- GDS #i
- GDS-107665
- Categoryi
- Torque Limiters
- UPCi
- 662288442387
- Country of Origini
- Japan
Common Questions
What is the outside diameter of the TP20X7/8?
The TP20X7/8 has a outside diameter of 3.5 in. The specification table above lists every published dimension for this part.
Are volume discounts available for the TP20X7/8?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning TP20X7/8, manufacturer article number 187765. Its UPC is 662288442387.
