Image differs from product
Torque Limiters
Browning TP50LX 1 1/8
TORQ/PRO
Product Type
Torq Pro Torque Limiter
Bore Shape
Straight Bore
Disc Spring Color
Yellow
Number of Bolt Holes
6
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
- Browning Torq/ Pro overload load clutch is release type ball detent style with single position reset
- Accuracy of trip torque within 10% with max torque range 5270 ft/lbs. Easy torque setting and adjusting by tightening or loosing adjusting nuts (bolts)
- Bore Shape
- Straight Bore
- Disc Spring Color
- Yellow
- Number of Bolt Holes
- 6
- Sensor Travel
- 0.11
- Nut Diameter (in)
- 3.86 in
- Bore Size (mm)
- 28.575 mmShaft size chart
- Backlash
- Small
- Bore Size (in)
- 1.125 inShaft size chart
- Hub Diameter (in)
- 2.76 in
- Recovery Style
- Jog
- Total Length (mm)
- 81.026 mm
- Spring Diameter
- 4.59
- Torque [Min] (N-m)
- 67.8
- Series / Model
- TP50L
- Disconnect Method
- Ball Detent
- Mounting Bolt Circle Diameter
- 5.5
- Type
- Torque Overload Devices
- Outside Diameter (in)
- 6.25 in
- Speed Limit
- 300
- Unit Accuracy
- 0.1
- Outside Diameter (mm)
- 158.75 mm
- Total Length (in)
- 3.19 in
- Nominal Bore (in)
- 1.125 in
- Sensor Plate
- Yes
- Torq/Pro Sprockets
- STP50
- Reset Type
- Automatic
- Detection Method
- Ball Detent
- Bolt Hole Thread Size (in)
- 5/16 | 18 in
- Torque Capacity [Max] (lb-ft)
- 108.3333
- Flange Diameter (in)
- 4.8 in
- Torque Capacity [Min] (lb-ft)
- 50
- Torque [Max] (N-m)
- 146.9
- Bore (Max) (in)
- 1.125 in
- Product Type
- Torq Pro Torque Limiter
- Torque Capacity [Max] (in-lb)
- 1,300
- Bore (Min) (in)
- 1.125 in
- Max RPM
- 300
- Torque Capacity [Min] (in-lb)
- 600
- Bore Type
- Finished w/ Keyway
- Pilot Size
- 6.25
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- TP50LX 1 1/8
- Mfg. Part Numberi
- 187797
- GDS #i
- GDS-107681
- Categoryi
- Torque Limiters
- UPCi
- 662288442561
- Country of Origini
- Japan
Documents & Support
- Installation ManualView
Common Questions
What is the outside diameter of the TP50LX 1 1/8?
The TP50LX 1 1/8 has a outside diameter of 6.25 in. The specification table above lists every published dimension for this part.
Are volume discounts available for the TP50LX 1 1/8?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning TP50LX 1 1/8, manufacturer article number 187797. Its UPC is 662288442561.
