Browning YSB12B54-30
BEVEL/MITER GEARS
This part has been discontinued.
Contact us for an alternative.
Product Type
Bevel Gear
Material
Steel
Number of Teeth/Threads
54
Pressure Angle
20
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Bevel and Miter Gears Develop Axial Thrust; Adequate Bearing support Must be Provided
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Browning Gears are rated in accordance with AGMA standards
- Material
- Steel
- Number of Teeth/Threads
- 54
- Pressure Angle
- 20
- Diametral Pitch
- 12
- Pitch Diameter (in)
- 4.5 in
- Hub Diameter (in)
- 1.75 in
- Face Width (in)
- 0.6 in
- Mounting Distance
- 1.75
- Hub Projection (in)
- 0.75 in
- Bore (Min) (in)
- 0.625 in
- Length Through Bore (in)
- 1.0625 in
- Bore (Max) (in)
- 1 in
- Bore Type
- Minimum Plain Bore
- Hub Type
- Type B
- Bushing Bore size (in)
- 0.6250 to 1.0000 in
- Bore Size (in)
- 0.625 in
- Product Type
- Bevel Gear
- Gear Construction
- Plain
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- YSB12B54-30
- Mfg. Part Numberi
- 1228105
- GDS #i
- GDS-105928
- Categoryi
- Open Gearing
- UPCi
- 662289114818
- Country of Origini
- India
Documents & Support
Datasheets, CAD drawings, and installation instructions are available on request.
Request Documentation