Image differs from product
Open Gearing
Browning YSM10F25HX3/4
BEVEL/MITER GEARS
This part has been discontinued.
Contact us for an alternative.
Product Type
Miter Gear
Material
Steel
Diametral Pitch
10
Pressure Angle
20
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Bevel and Miter Gears Develop Axial Thrust; Adequate Bearing support Must be Provided
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Browning Gears are rated in accordance with AGMA standards
- Material
- Steel
- Diametral Pitch
- 10
- Pressure Angle
- 20
- Mounting Distance
- 2.4375
- Face Width (in)
- 0.55 in
- Hub Projection (in)
- 0.9375 in
- Number of Teeth/Threads
- 25
- Pitch Diameter (in)
- 2.5 in
- Hub Diameter (in)
- 2 in
- Length Through Bore (in)
- 1.625 in
- Bore (Max) (in)
- 0.75 in
- Bore Type
- Finished Bore
- Bore (Min) (in)
- 0.75 in
- Product Type
- Miter Gear
- Bore Size (in)
- 0.75 inShaft size chart
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- YSM10F25HX3/4
- Mfg. Part Numberi
- 1228840
- GDS #i
- GDS-105954
- Categoryi
- Open Gearing
- UPCi
- 662289236473
- Country of Origini
- India
Documents & Support
Datasheets, CAD drawings, and installation instructions are available on request.
Request DocumentationCommon Questions
Has the Browning YSM10F25HX3/4 been discontinued?
Yes. Browning has discontinued the YSM10F25HX3/4. Contact us for cross-reference help finding a suitable replacement.
Are volume discounts available for the YSM10F25HX3/4?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
What is the minimum order quantity for the YSM10F25HX3/4?
The minimum order quantity for the YSM10F25HX3/4 is 10 units.
Is this a genuine Browning part?
Yes. GDS Supply supplies the genuine Browning YSM10F25HX3/4, manufacturer article number 1228840. Its UPC is 662289236473.
