Browning YSMS10F25RHX7/8
BEVEL/MITER GEARS
This part has been discontinued.
Contact us for an alternative.
Product Type
Spiral Miter Gear
Material
Steel
Face Width (in)
0.57 in
Pitch Diameter (in)
2.5 in
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Bevel and Miter Gears Develop Axial Thrust; Adequate Bearing support Must be Provided
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Browning Gears are rated in accordance with AGMA standards
- Material
- Steel
- Face Width (in)
- 0.57 in
- Pitch Diameter (in)
- 2.5 in
- Number of Teeth/Threads
- 25
- Lead/Helix Angle
- 35
- Pressure Angle
- 20
- Hub Diameter (in)
- 2 in
- Mounting Distance
- 2.437
- Diametral Pitch
- 10
- Hub Projection (in)
- 0.9375 in
- Bore Type
- Finished Bore
- Bore (Min) (in)
- 0.875 in
- Bore (Max) (in)
- 0.875 in
- Length Through Bore (in)
- 1.625 in
- Spiral Gear Hand Direction
- RIGHT
- Product Type
- Spiral Miter Gear
- Bore Size (in)
- 0.875 in
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Browning
- Mfg. Catalog Numberi
- YSMS10F25RHX7/8
- Mfg. Part Numberi
- 1229681
- GDS #i
- GDS-105997
- Categoryi
- Open Gearing
- UPCi
- 662289167234
- Country of Origini
- India
Documents & Support
Datasheets, CAD drawings, and installation instructions are available on request.
Request Documentation