Stainless output shafts available in the Washguard version.
Large oil capacity provides positive splash lubrication and superior cooling capability.
Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
Tapered roller bearings on output shaft for high overhung and thrust load capacities.
The unique quill seal guard protects the input seal from damage during motor installation.
All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
Mounting dimensions are interchangeable with most industry standard reducers.
Product details
Specifications
Center Distance (in)
1.33
Product Line
EL Series - Aluminum Worm Gear Reducers
Reducer Style
Worm - Right Angle
Input HP
1.025
Center Distance Range
1" thru 3.25"
Output Shaft Orientation
H1
Ratio Range
7.5:1
HP Range
1 to 1-1/2 (< 2)
Reducer
Worm - Right Angle
Output HP
0.933
Input Style
Shaft
Output RPM
233
Product Type
Right Angle
Input Diameter (in)
0.5
Input RPM
1,750
Service Factor
1
Input Keyway
1/8 x 1.00
Series Style
EL-H-H1
Mounting Style
Shaft Mount
No. of Gear Reductions
Single
Model Code
H813
Ratio
7.5:1
Shaft Seal Material
Viton
Gear Type
Worm
Output Torque Range
250 to 500 in lbs
Output Key
3/16 X 1.50
Assembly
H-H1
Output Style
H1
Output Diameter (in)
0.625
Output Shaft Assembly Code
H1
Reduction
Single
Housing Material
Aluminum
Output Torque Rating (in-lb)
252
Output Shaft
Hollow Bore
Always verify dimensions, load ratings, material, and seal type before ordering.
Identification
BrandiManufacturer or product brand
Grove Gear
Mfg. Catalog NumberiManufacturer catalog number
EL-H813-7.5-H_-10
Mfg. Part NumberiManufacturer part number
EL8130502.10
GDS #iGDS internal part number
GDS-142916
CategoryiCatalog classification
Worm
UPCiUniversal Product Code
662959001189
Bore CodeiManufacturer ordering code for the bore
10
SeriesiManufacturer product family
EL Series - Aluminum Worm Gear Reducers
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.