Stainless output shafts available in the Washguard version.
Large oil capacity provides positive splash lubrication and superior cooling capability.
Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
Tapered roller bearings on output shaft for high overhung and thrust load capacities.
The unique quill seal guard protects the input seal from damage during motor installation.
All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
Mounting dimensions are interchangeable with most industry standard reducers.
Product details
Specifications
Input Style
Shaft
Gear Type
Worm
Output Shaft Orientation
H1
Input Diameter (in)
0.625
Shaft Seal Material
Viton
Model Code
H818
Output Diameter (in)
0.750
Mounting Style
Shaft Mount
Input RPM
1,750
Assembly
H-H1
Center Distance Range
1" thru 3.25"
Output Key
3/16 X 1.50
Input Keyway
3/16 X 1.38
Center Distance (in)
1.75
Ratio Range
7.5:1
HP Range
1 to 1-1/2 (< 2)
Service Factor
1
Input HP
1.909
Ratio
7.5:1
No. of Gear Reductions
Single
Output Torque Range
250 to 500 in lbs
Series Style
EL-H-H1
Reducer Style
Worm - Right Angle
Output RPM
233.3
Output Shaft Assembly Code
H1
Reducer
Worm - Right Angle
Output HP
1.745
Product Line
EL Series - Aluminum Worm Gear Reducers
Output Style
H1
Product Type
Right Angle
Reduction
Single
Output Shaft
Hollow Bore
Output Torque Rating (in-lb)
471
Housing Material
Aluminum
Always verify dimensions, load ratings, material, and seal type before ordering.
Identification
BrandiManufacturer or product brand
Grove Gear
Mfg. Catalog NumberiManufacturer catalog number
EL-H818-7.5-H_-12
Mfg. Part NumberiManufacturer part number
EL8180502.12
GDS #iGDS internal part number
GDS-142969
CategoryiCatalog classification
Worm
UPCiUniversal Product Code
662959003442
SeriesiManufacturer product family
EL Series - Aluminum Worm Gear Reducers
Bore CodeiManufacturer ordering code for the bore
12
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.