Stainless output shafts available in the Washguard version.
Large oil capacity provides positive splash lubrication and superior cooling capability.
Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
Tapered roller bearings on output shaft for high overhung and thrust load capacities.
The unique quill seal guard protects the input seal from damage during motor installation.
All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
Mounting dimensions are interchangeable with most industry standard reducers.
Product details
Specifications
Output Key
1/4 X 2.5
Center Distance Range
1" thru 3.25"
Ratio Range
7.5:1
Assembly
H-H1
Product Line
EL Series - Aluminum Worm Gear Reducers
Output RPM
233.3
Series Style
EL-H-H1
Input Style
Shaft
Input RPM
1,750
No. of Gear Reductions
Single
Gear Type
Worm
HP Range
3HP (< 5)
Output Torque Range
500 to 1000 in lbs
Center Distance (in)
2.38
Reducer Style
Worm - Right Angle
Reducer
Worm - Right Angle
Output Shaft Orientation
H1
Output Shaft Assembly Code
H1
Product Type
Right Angle
Model Code
H824
Output Style
H1
Mounting Style
Shaft Mount
Input HP
3.992
Input Diameter (in)
0.75
Output Diameter (in)
1.188
Service Factor
1
Input Keyway
3/16 x 1.63
Output HP
3.685
Shaft Seal Material
Viton
Ratio
7.5:1
Reduction
Single
Housing Material
Aluminum
Output Shaft
Hollow Bore
Output Torque Rating (in-lb)
995
Always verify dimensions, load ratings, material, and seal type before ordering.
Identification
BrandiManufacturer or product brand
Grove Gear
Mfg. Catalog NumberiManufacturer catalog number
EL-H824-7.5-H_-19
Mfg. Part NumberiManufacturer part number
EL8240502.19
GDS #iGDS internal part number
GDS-143089
CategoryiCatalog classification
Worm
UPCiUniversal Product Code
662959015827
SeriesiManufacturer product family
EL Series - Aluminum Worm Gear Reducers
Bore CodeiManufacturer ordering code for the bore
19
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.