Stainless output shafts available in the Washguard version.
Large oil capacity provides positive splash lubrication and superior cooling capability.
Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
Tapered roller bearings on output shaft for high overhung and thrust load capacities.
The unique quill seal guard protects the input seal from damage during motor installation.
All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
Mounting dimensions are interchangeable with most industry standard reducers.
Product details
Specifications
Output Torque Range
1000 to 2500 in lbs
Output Key
1/2 X 3.38
Output Shaft Orientation
H1
Output HP
8.264
Model Code
H832
Output Shaft Assembly Code
H1
Shaft Seal Material
Viton
Ratio Range
7.5:1
Reducer Style
Worm - Right Angle
Gear Type
Worm
Series Style
EL-H-H1
Product Line
EL Series - Aluminum Worm Gear Reducers
Center Distance Range
1" thru 3.25"
HP Range
7-1/2 (< 10)
Service Factor
1
Input Style
Shaft
No. of Gear Reductions
Single
Ratio
7.5:1
Center Distance (in)
3.25
Input HP
8.863
Assembly
H-H1
Input Keyway
3/16 X 1.63
Mounting Style
Shaft Mount
Output Diameter (in)
1.938
Product Type
Right Angle
Input Diameter (in)
0.875
Reducer
Worm - Right Angle
Output Style
H1
Output RPM
233.3
Input RPM
1,750
Reduction
Single
Output Torque Rating (in-lb)
2232
Housing Material
Aluminum
Output Shaft
Hollow Bore
Always verify dimensions, load ratings, material, and seal type before ordering.
Identification
BrandiManufacturer or product brand
Grove Gear
Mfg. Catalog NumberiManufacturer catalog number
EL-H832-7.5-H_-31
Mfg. Part NumberiManufacturer part number
EL8320558.31
GDS #iGDS internal part number
GDS-143332
CategoryiCatalog classification
Worm
UPCiUniversal Product Code
662959049747
Bore CodeiManufacturer ordering code for the bore
31
SeriesiManufacturer product family
EL Series - Aluminum Worm Gear Reducers
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.