316 stainless steel housing and covers to withstand extreme environments.
Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant – USDA Class H1 approved.
Vent-free “sealed-for-life” design with Enviroseal technology.
Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
O-ring on face of input flange provides a positive seal against moisture intrusion.
303 stainless steel output shaft or sleeve
Worms are cut, heat-treated, ground and polished to provide efficient, quiet operation.
All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
Mounting dimensions are interchangeable with most industry standard reducers.
Product details
Specifications
AG
5.5
Frame Size
56C
Mounting Style
Shaft Mt
I
3.01
Reduction
Single
Input RPM
1,750
Output RPM
87.5
D
2.06
C
5.75
V
1.44
Output Style
H1
Input Style
C-Face Quill
Ratio
20:1
AD
4.4
B
5.06
Input HP
1.046
Reducer Style
SS-HMQ
Nominal Motor HP Rating to HP @ 1750 RPM
1
Assembly
SS-HMQ
Output HP
0.875
Output Diameter (in)
0.750
Product Type
Right Angle
Center Distance Range
1" thru 3.25"
Product Line
Stainless Steel Worm Gear Reducers
E
1.75
Input Diameter (in)
0.625
Gear Type
Worm
Ratio Range
20:1
Output Shaft Assembly Code
H1
A
3.32
Service Factor
1
Center Distance (in)
1.75
HP Range
1 to 1-1/2 (< 2)
Output Torque Range
500 to 1000 in lbs
Certifications
IP69K, USDA Accepted Equipment
Reducer
Worm - Right Angle
No. of Gear Reductions
Single
Motor Frame Size
56C
Housing Material
Stainless Steel
Output Torque Rating (in-lb)
630
Output Shaft
Hollow Bore
Always verify dimensions, load ratings, material, and seal type before ordering.
Identification
BrandiManufacturer or product brand
Grove Gear
Mfg. Catalog NumberiManufacturer catalog number
SS-HMQ818-20-H1-56-12
Mfg. Part NumberiManufacturer part number
S183046112
GDS #iGDS internal part number
GDS-157730
CategoryiCatalog classification
Worm
UPCiUniversal Product Code
690310097038
SeriesiManufacturer product family
Stainless Steel Worm Gear Reducers
Series CodeiManufacturer series code
SS
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Cross reference for Grove Gear SS-HMQ818-20-H1-56-12
Part numbers from other manufacturers that are interchangeable with Grove Gear SS-HMQ818-20-H1-56-12. Pick a brand, or check a number.
Keltech 1
K45R21 ZOWB3
Your number not listed? Ask us to cross it and we will confirm an equivalent and quote it.
Other manufacturers’ names and part numbers identify interchangeable products only; GDS Supply is not affiliated with them. Confirm critical dimensions before ordering.