Image differs from product
Complete Units
Jaure 52MT FF
GEAR COUPLINGS
Material
Medium Carbon Steel
Bore Size Max (mm)
52 mm
Bore Type
Rough Bore
Compatible Bore Size [Min] (mm)
14 mm
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Increased pitch gear diameter allows for larger maximum bore and higher torque capacity than other equivalent size couplings.
- MT coupling halves (AGMA sizes 1-7) are interchangeable with couplings of other manufacturers. MTT type are not interchangeable.
- Coupling halves are joined by special body fitting grade 8 bolts. Adapted nuts are used. While applying tightening torque, nuts rotate and bolts are kept fixed.
- Available in multiple configurations and sizes.
- Material
- Medium Carbon Steel
- Bore Size Max (mm)
- 52 mm
- Bore Type
- Rough Bore
- Compatible Bore Size [Min] (mm)
- 14 mm
- Configuration
- Full Flex
- Coupling Size
- 52
- Coupling Type
- Gear Coupling
- Fastener Quantity
- 6
- Fastener Size
- Special 6.5/M6x43
- Length Through Bore (mm)
- 43 mm
- Lube/Non-Lube
- Lubricated
- Measurement System
- Metric
- Outside Diameter (mm)
- 111 mm
- Overall Length (mm)
- 89 mm
- Speed Max (rpm)
- 8,600 rpm
- Style
- MT
- Tooth Profile
- Crown faced, Involute Stub Tooth
- Torque [Max] (N⋅m)
- 3,600 N·m
- Torque Rating (N⋅m)
- 1,780 N·m
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Jaure
- Mfg. Catalog Numberi
- 52MT FF
- Mfg. Part Numberi
- KTAD9900013
- GDS #i
- GDS-121268
- Categoryi
- Complete Units
- UPCi
- 662384001235
Common Questions
What is the outside diameter of the 52MT FF?
The 52MT FF has a outside diameter of 111 mm. The specification table above lists every published dimension for this part.
Is this a genuine Jaure part?
Yes. GDS Supply supplies the genuine Jaure 52MT FF, manufacturer article number KTAD9900013. Its UPC is 662384001235.
