Image differs from product
Needle Roller Bearings
McGill GR 18 SS
GR Series 500
GR 18 is also available as
Series
Standard
Material
52100 Bearing Steel
Dynamic Load Rating (lb)
6,250 lb
Bore Size - Inch
1.125
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Machined race needle bearing
- Full complement of center-guided needle rolling elements
- Annular lubrication groove
- Double rubber-lipped seals with both lips turned in
- Material
- 52100 Bearing Steel
- Bore Size - Inch
- 1.125Shaft size chart
- Bore Size (in)
- 1.1250 inShaft size chart
- Speed (Max) Grease
- 3,400
- Housing & Shaft Fillet (in)
- 0.04 in
- Radial Lub Hole Diameter (in)
- 0.09 in
- Outside Diameter (in)
- 1.625 in
- Outer Width (in)
- 1.25 in
- Includes Inner Ring
- No
- Cage Material
- No retainer
- Rolling Element
- Needle Roller
- Misalignment
- No
- Bore Type
- Straight
- Number of Rows
- 1
- Radial Clearance
- Normal
- Seal Type
- Rubber Lip
- Duplexing
- No
- Platform
- Guiderol Bearing
- Dynamic Load Rating (lb)
- 6,250 lb
- Sealed
- Sealed - Both Sides
- Speed [Max] Grease (RPM)
- 3,400 rpm
- Full Complement/Caged
- Full Complement
- Static Load Rating (lb)
- 15,200 lb
- Lubrication Hole Type
- Lubrication Groove & Hole
- Precision Rating
- RBEC-1
- Related Inner Ring
- MI 14
- Flanges
- No Flanges
- Standard Met
- ABMA, ISO
- Enclosure
- Sealed Both Sides
- Separable
- Nonseparable
- Component Type
- Outer race only
- Retainer
- No
- Operating Temperature Range (F)
- -20 to 250 °F °F
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- McGill
- Mfg. Catalog Numberi
- GR 18 SS
- Mfg. Part Numberi
- 5001830000
- GDS #i
- GDS-113294
- Categoryi
- Needle Roller Bearings
- UPCi
- 726166061715
- Seriesi
- Standard
- Country of Origini
- Mexico
GR 18 options
| Part # | Configuration | Price | View |
|---|---|---|---|
| GR 18 N | Narrow width, unsealed only — typically 0.25 in narrower | Request quote | View |
| GR 18 RS | Single seal, lip turned out | $314.12 | View |
| GR 18 RSS | Double seal, both lips turned out | $96.21 | View |
| GR 18 S | Single seal, lip turned in | $352.07 | View |
| GR 18 SRS | Double seal, one lip turned in and one turned out | $291.69 | View |
| GR 18 SSThis part | Double seal, both lips turned in | $347.82 |
Common Questions
What is the outside diameter of the GR 18 SS?
The GR 18 SS has a outside diameter of 1.625 in. The specification table above lists every published dimension for this part.
Is this a genuine McGill part?
Yes. GDS Supply supplies the genuine McGill GR 18 SS, manufacturer article number 5001830000. Its UPC is 726166061715.
Related Products
Replaces Legacy Parts
This product is a direct replacement for the following discontinued part numbers.
- 5001800000McGill GR 18Discontinued