Image differs from product
Right Angle Gearing
Morse 133Q56H50 010
RAIDER, UH, QH 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
56C
Reducer Style
Standard
Efficiency
80
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- Reducer Style
- Standard
- Efficiency
- 80
- H
- 1.72
- P
- 3.05
- Max Thrust Load (Output Shaft)
- 1144
- Input Speed
- 1750
- F
- 1
- N
- 2.375
- Input Bore (C Face)
- 0.625
- D
- 2
- B
- 2.82
- J
- 3.46
- L
- 2.61
- C
- 3.25
- Motor Frame Size
- 56C
- Ratio
- 50:1
- Input Keyway (C Face)
- 3/16 x 3/32
- M
- 4.75
- K
- 4.66
- R
- 3.25
- Ratio Range
- 50:1
- Product Type
- Worm Speed Reducer
- E
- 1.63
- No. of Gear Reductions
- Single
- Service Factor
- 1
- Center Distance (in)
- 1.33
- Output Diameter (in)
- 0.625
- Mounting Style
- Shaft Mt
- Gear Type
- Worm
- Input Diameter (in)
- 0.625
- Input HP @ 1750 RPM
- 0.285
- Frame Size
- 56C
- A
- 3.8
- Center Distance Range
- 1" thru 3.25"
- Input Style
- C-Face Quill
- Output Torque Range
- 250 to 500 in lbs
- HP Range
- 1/3 HP or Less (< 1/2)
- Output Shaft Direction
- L or R
- Output Shaft
- Hollow Bore
- Housing Material
- Cast Iron
- Output Torque Rating (in-lb)
- 327 in-lbs @1750 input RPM
- Overhung Load Rating (Output Shaft(lb))
- 700
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 133Q56H50 010
- Mfg. Part Numberi
- XB1119
- GDS #i
- GDS-122797
- Categoryi
- Right Angle Gearing
- UPCi
- 662288338116
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 133Q56H50 010?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 133Q56H50 010, manufacturer article number XB1119. Its UPC is 662288338116.
