Image differs from product
Morse 133UH10 010
RAIDER, UH, QH 1-3.25
Product Type
Worm Speed Reducer
Key Sq.
0.125
Efficiency
80
K
4.66
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
| Part Number | XB1093 |
| Brand | Morse |
| Key Sq. | 0.125 |
| Efficiency | 80 |
| K | 4.66 |
| H | 1.72 |
| Ratio | 10:1 |
| Max Thrust Load (Output Shaft) | 1070 |
| D | 2 |
| N | 2.375 |
| Y | 1.76 |
| L | 2.61 |
| Reducer Style | Standard |
| F | 1 |
| Input Speed | 1750 |
| Key Length | 1 |
| J | 3.82 |
| M | 4.75 |
| B | 3.8 |
| X | 0.5 |
| C | 3.25 |
| O | 5.72 |
| Manufacturer Reducer Size | 133 |
| Maximum Input HP | 0.823 hp @ 1750 rpm |
| Service Factor | 1 |
| Input HP @ 1750 RPM | 0.823 |
| No. of Gear Reductions | Single |
| Input Style | Shaft |
| Product Type | Worm Speed Reducer |
| Series Code | Raider |
| E | 1.9 |
| A | 3.82 |
| Output Diameter (in) | 0.625 |
| Input Diameter (in) | 0.5 |
| Mounting Style | Shaft Mt |
| Center Distance Range | 1" thru 3.25" |
| Gear Type | Worm |
| Ratio Range | 10:1 |
| Center Distance (in) | 1.33 |
| HP Range | 1/2 to 3/4 HP (< 1) |
| Output Torque Range | 250 to 500 in lbs |
| Output Shaft Direction | L or R |
| Output Torque Rating (in-lb) | 263 in-lbs @1750 input RPM |
| Overhung Load Rating (Output Shaft(lb)) | 700 |
| Output Shaft | Hollow Bore |
| Housing Material | Cast Iron |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Morse |
| Mfg. Catalog Numberi | 133UH10 010 |
| Mfg. Part Numberi | XB1093 |
| GDS #i | GDS-122783 |
| Categoryi | Gearing / Right Angle Gearing |
| UPCi | 662288337904 |
