Image differs from product
Morse 133UH50 010
RAIDER, UH, QH 1-3.25
Product Type
Worm Speed Reducer
Max Thrust Load (Output Shaft)
1144
Reducer Style
Standard
Input Speed
1750
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
| Part Number | XB1099 |
| Brand | Morse |
| Max Thrust Load (Output Shaft) | 1144 |
| Reducer Style | Standard |
| Input Speed | 1750 |
| Key Length | 1 |
| B | 3.8 |
| C | 3.25 |
| Efficiency | 80 |
| L | 2.61 |
| D | 2 |
| Key Sq. | 0.125 |
| O | 5.72 |
| N | 2.375 |
| Ratio | 50:1 |
| K | 4.66 |
| X | 0.5 |
| J | 3.82 |
| H | 1.72 |
| Y | 1.76 |
| F | 1 |
| M | 4.75 |
| Ratio Range | 50:1 |
| Input Diameter (in) | 0.5 |
| Gear Type | Worm |
| Input HP @ 1750 RPM | 0.285 |
| E | 1.9 |
| Product Type | Worm Speed Reducer |
| Series Code | Raider |
| A | 3.82 |
| Input Style | Shaft |
| Center Distance Range | 1" thru 3.25" |
| Service Factor | 1 |
| No. of Gear Reductions | Single |
| Mounting Style | Shaft Mt |
| Output Diameter (in) | 0.625 |
| Center Distance (in) | 1.33 |
| Output Torque Range | 250 to 500 in lbs |
| HP Range | 1/3 HP or Less (< 1/2) |
| Output Shaft Direction | L or R |
| Overhung Load Rating (Output Shaft(lb)) | 700 |
| Output Shaft | Hollow Bore |
| Housing Material | Cast Iron |
| Output Torque Rating (in-lb) | 327 in-lbs @1750 input RPM |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Morse |
| Mfg. Catalog Numberi | 133UH50 010 |
| Mfg. Part Numberi | XB1099 |
| GDS #i | GDS-122788 |
| Categoryi | Gearing / Right Angle Gearing |
| UPCi | 662288337959 |
