Image differs from product
Right Angle Gearing
Morse 154UH20 010
RAIDER, UH, QH 1-3.25
Product Type
Worm Speed Reducer
Key Sq.
0.1875
C
4.19
X
0.63
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- Key Sq.
- 0.1875
- C
- 4.19
- X
- 0.63
- Key Length
- 1.38
- F
- 1.38
- H
- 1.91
- L
- 3.14
- K
- 5.38
- Efficiency
- 80
- M
- 5.42
- O
- 6.79
- Input Speed
- 1750
- D
- 2.75
- Ratio
- 20:1
- Reducer Style
- Standard
- N
- 2.71
- J
- 4.35
- B
- 3.44
- Y
- 1.76
- Max Thrust Load (Output Shaft)
- 1144
- Maximum Input HP
- 0.919 hp @ 1750 rpm
- Manufacturer Reducer Size
- 154
- Gear Type
- Worm
- Center Distance Range
- 1" thru 3.25"
- Output Diameter (in)
- 0.625
- Input Diameter (in)
- 0.625
- Input HP @ 1750 RPM
- 0.919
- E
- 2.09
- Service Factor
- 1
- A
- 4.88
- Product Type
- Worm Speed Reducer
- Mounting Style
- Shaft Mt
- No. of Gear Reductions
- Single
- Ratio Range
- 20:1
- Center Distance (in)
- 1.54
- Input Style
- Shaft
- HP Range
- 1/2 to 3/4 HP (< 1)
- Output Torque Range
- 500 to 1000 in lbs
- Output Shaft Direction
- L or R
- Output Shaft
- Hollow Bore
- Housing Material
- Cast Iron
- Overhung Load Rating (Output Shaft(lb))
- 860
- Output Torque Rating (in-lb)
- 518 in-lbs @1750 input RPM
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 154UH20 010
- Mfg. Part Numberi
- XC1134
- GDS #i
- GDS-122864
- Categoryi
- Right Angle Gearing
- UPCi
- 662288340607
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 154UH20 010?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 154UH20 010, manufacturer article number XC1134. Its UPC is 662288340607.
