Image differs from product
Right Angle Gearing
Morse 154UL30
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
Key Sq.
0.1875
X
0.63
H
1.91
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- Key Sq.
- 0.1875
- X
- 0.63
- H
- 1.91
- Input Speed
- 1750
- F
- 2.75
- Y
- 1.76
- Key Length
- 1.38
- Reducer Style
- Standard
- C
- 5.38
- N
- 4.31
- D
- 1.91
- J
- 4.19
- K
- 2.09
- Ratio
- 30:1
- V
- 2.11
- L
- 4.69
- Shaft Seal Material
- Nitrile
- Efficiency
- 80
- B
- 5.13
- Max Thrust Load (Output Shaft)
- 1399
- M
- 1.69
- O
- 1.78
- Maximum Input HP
- 0.63 hp @ 1750 rpm
- Manufacturer Reducer Size
- 154
- Input RPM
- 1,750
- Input Keyway
- 3/16 X 0.94
- Center Distance Range
- 1" thru 3.25"
- Service Factor
- 1
- H Tap Size
- 5/16 - 18
- Product Type
- Worm Speed Reducer
- Gear Type
- Worm
- E
- 2.09
- Assembly
- U-L
- Reducer
- Worm - Right Angle
- Output Diameter (in)
- 0.750
- Output Key
- 3/16 X 1.25
- Output Shaft Assembly Code
- L
- Model Code
- 154U
- G
- 1.38
- H Depth
- 0.5
- Ratio Range
- 30:1
- Input Style
- Solid Shaft
- No. of Gear Reductions
- Single
- I
- 2.75
- U
- 0.625
- Center Distance (in)
- 1.54
- Input Diameter (in)
- 0.625
- Output RPM
- 58.3
- Mounting Style
- No Base
- T
- 0.75
- A
- 3.69
- Cd
- 1.54
- Input HP @ 1750 RPM
- 0.47
- HP Range
- 1/2 to 3/4 HP (< 1)
- Output Torque Range
- 250 to 500 in lbs
- Output Shaft Direction
- Left
- Housing Material
- Cast Iron
- Output Shaft
- Solid Shaft
- Overhung Load Rating (Output Shaft(lb))
- 388
- Output Torque Rating (in-lb)
- 478 in-lbs @1750 input RPM
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 154UL30
- Mfg. Part Numberi
- XC1007
- GDS #i
- GDS-122810
- Categoryi
- Right Angle Gearing
- UPCi
- 662288339601
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 154UL30?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 154UL30, manufacturer article number XC1007. Its UPC is 662288339601.
