Image differs from product
Right Angle Gearing
Morse 154UL40
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
D
1.91
Efficiency
80
Max Thrust Load (Output Shaft)
1399
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- D
- 1.91
- Efficiency
- 80
- Max Thrust Load (Output Shaft)
- 1399
- Key Sq.
- 0.1875
- C
- 5.38
- Ratio
- 40:1
- V
- 2.11
- L
- 4.69
- Input Speed
- 1750
- X
- 0.63
- K
- 2.09
- Key Length
- 1.38
- B
- 5.13
- Shaft Seal Material
- Nitrile
- H
- 1.91
- F
- 2.75
- O
- 1.78
- N
- 4.31
- M
- 1.69
- Y
- 1.76
- Reducer Style
- Standard
- J
- 4.19
- Manufacturer Reducer Size
- 154
- Maximum Input HP
- 0.56 hp @ 1750 rpm
- Product Type
- Worm Speed Reducer
- G
- 1.38
- H Depth
- 0.5
- H Tap Size
- 5/16 - 18
- Input HP @ 1750 RPM
- 0.38
- Gear Type
- Worm
- T
- 0.75
- Assembly
- U-L
- Input Diameter (in)
- 0.625
- Input Style
- Solid Shaft
- Mounting Style
- No Base
- Output Shaft Assembly Code
- L
- U
- 0.625
- Reducer
- Worm - Right Angle
- Output RPM
- 43.7
- Service Factor
- 1
- Ratio Range
- 40:1
- Center Distance Range
- 1" thru 3.25"
- No. of Gear Reductions
- Single
- Input Keyway
- 3/16 X 0.94
- Output Key
- 3/16 X 1.25
- A
- 3.69
- Cd
- 1.54
- E
- 2.09
- Model Code
- 154U
- Output Diameter (in)
- 0.750
- Input RPM
- 1,750
- I
- 2.75
- Center Distance (in)
- 1.54
- HP Range
- 1/2 to 3/4 HP (< 1)
- Output Torque Range
- 500 to 1000 in lbs
- Output Shaft Direction
- Left
- Housing Material
- Cast Iron
- Output Shaft
- Solid Shaft
- Overhung Load Rating (Output Shaft(lb))
- 388
- Output Torque Rating (in-lb)
- 520 in-lbs @1750 input RPM
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 154UL40
- Mfg. Part Numberi
- XC1008
- GDS #i
- GDS-122811
- Categoryi
- Right Angle Gearing
- UPCi
- 662288339618
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 154UL40?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 154UL40, manufacturer article number XC1008. Its UPC is 662288339618.
