Morse 154UL50
Morse Raider Plus Worm Gear Reducer Cast Iron Single-Reduction Worm Reducer - 154UL50
Product Type
Worm Speed Reducer
Input Speed
1750
Shaft Seal Material
Nitrile
Ratio
50:1
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
| Part Number | XC1009 |
| Brand | Morse |
| Input Speed | 1750 |
| Shaft Seal Material | Nitrile |
| Ratio | 50:1 |
| Thrust Rating - output shaft | 1399 |
| Key Length | 1.38 |
| Key Sq. | 0.1875 |
| Reducer Style | Standard |
| Efficiency | 80 |
| Input Style | Solid Shaft |
| Center Distance (in) | 1.54 |
| Reducer | Worm - Right Angle |
| Input Keyway | 3/16 X 0.94 in |
| Product Type | Worm Speed Reducer |
Always verify dimensions, load ratings, material, and seal type before ordering.
| Brandi | Morse |
| Mfg. Catalog Numberi | 154UL50 |
| Mfg. Part Numberi | XC1009 |
| GDS #i | GDS-122812 |
| Categoryi | Gearing / Right Angle Gearing |
Documents & Support
Datasheets, CAD drawings, and installation instructions are available on request.
Request Documentation
