Image differs from product
Right Angle Gearing
Morse 154ULR40
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
M
1.69
K
2.09
V
2.11
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- M
- 1.69
- K
- 2.09
- V
- 2.11
- X
- 0.63
- F
- 2.75
- H
- 1.91
- Max Thrust Load (Output Shaft)
- 1399
- Key Length
- 1.38
- O
- 1.78
- Key Sq.
- 0.1875
- Input Speed
- 1750
- Ratio
- 40:1
- Reducer Style
- Standard
- Efficiency
- 80
- Shaft Seal Material
- Nitrile
- C
- 5.38
- L
- 4.69
- N
- 4.31
- B
- 5.13
- D
- 1.91
- Y
- 1.76
- J
- 4.19
- Ratio Range
- 40:1
- A
- 3.69
- Input RPM
- 1,750
- Center Distance Range
- 1" thru 3.25"
- Input HP @ 1750 RPM
- 0.38
- Output Diameter (in)
- 0.750
- Service Factor
- 1
- Input Keyway
- 3/16 X 0.94
- Gear Type
- Worm
- No. of Gear Reductions
- Single
- E
- 2.09
- Output Shaft Assembly Code
- D
- Output RPM
- 43.7
- Input Diameter (in)
- 0.625
- Product Type
- Worm Speed Reducer
- Assembly
- U-LR
- H Depth
- 0.5
- Input Style
- Solid Shaft
- I
- 2.75
- H Tap Size
- 5/16 - 18
- T
- 0.75
- U
- 0.625
- G
- 1.38
- Cd
- 1.54
- O(asterisk)
- 1.78
- Output Shaft Orientation
- LR
- Center Distance (in)
- 1.54
- Mounting Style
- No Base
- Output Key
- 3/16 X 1.25
- Model Code
- 154U
- Reducer
- Worm - Right Angle
- Output Torque Range
- 500 to 1000 in lbs
- HP Range
- 1/2 to 3/4 HP (< 1)
- Output Shaft Direction
- Double
- Housing Material
- Cast Iron
- Output Shaft
- Solid Shaft
- Overhung Load Rating (Output Shaft(lb))
- 388
- Output Torque Rating (in-lb)
- 520 in-lbs @1750 input RPM
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 154ULR40
- Mfg. Part Numberi
- XC1028
- GDS #i
- GDS-122825
- Categoryi
- Right Angle Gearing
- UPCi
- 662288339762
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 154ULR40?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 154ULR40, manufacturer article number XC1028. Its UPC is 662288339762.
