Right Angle Gearing
Morse 175Q56H10 100
RAIDER, UH, QH 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
56C
Input Bore (C Face)
0.625
Ratio
10:1
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- Input Bore (C Face)
- 0.625
- Ratio
- 10:1
- F
- 1.38
- H
- 2.06
- Efficiency
- 80
- Input Keyway (C Face)
- 3/16x3/32
- Max Thrust Load (Output Shaft)
- 976
- M
- 5.5
- B
- 3.56
- L
- 3.24
- N
- 2.75
- J
- 4.09
- D
- 2.75
- K
- 5.75
- Reducer Style
- Standard
- P
- 3.81
- Input Speed
- 1750
- C
- 4.19
- R
- 3.25
- Motor Frame Size
- 56C
- E
- 2.09
- No. of Gear Reductions
- Single
- Ratio Range
- 10:1
- Gear Type
- Worm
- Center Distance Range
- 1" thru 3.25"
- Input Style
- C-Face Quill
- Product Type
- Worm Speed Reducer
- Mounting Style
- Shaft Mt
- Center Distance (in)
- 1.75
- A
- 5.06
- Output Diameter (in)
- 1.000
- Service Factor
- 1
- Input Diameter (in)
- 0.625
- Input HP @ 1750 RPM
- 1.625
- Frame Size
- 56C
- HP Range
- 1 to 1-1/2 (< 2)
- Output Torque Range
- 500 to 1000 in lbs
- Output Shaft Direction
- L or R
- Overhung Load Rating (Output Shaft(lb))
- 1,200
- Output Torque Rating (in-lb)
- 528 in-lbs @1750 input RPM
- Housing Material
- Cast Iron
- Output Shaft
- Hollow Bore
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 175Q56H10 100
- Mfg. Part Numberi
- XD1183
- GDS #i
- GDS-122956
- Categoryi
- Right Angle Gearing
- UPCi
- 662288343943
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 175Q56H10 100?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 175Q56H10 100, manufacturer article number XD1183. Its UPC is 662288343943.
