Right Angle Gearing
Morse 175UL30
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
X
0.63
L
4.68
C
5.75
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- X
- 0.63
- L
- 4.68
- C
- 5.75
- F
- 2.75
- J
- 4.19
- Max Thrust Load (Output Shaft)
- 1399
- Reducer Style
- Standard
- B
- 4.81
- Ratio
- 30:1
- Key Sq.
- 0.1875
- D
- 2.06
- H
- 2.06
- Input Speed
- 1750
- N
- 4.31
- M
- 1.81
- V
- 2.05
- Y
- 1.76
- O
- 1.88
- Shaft Seal Material
- Nitrile
- K
- 2.09
- Efficiency
- 80
- Key Length
- 1.38
- Input Style
- Solid Shaft
- H Depth
- 0.61
- Center Distance (in)
- 1.75
- Input RPM
- 1,750
- Reducer
- Worm - Right Angle
- E
- 2.09
- Product Type
- Worm Speed Reducer
- Input Keyway
- 3/16 X 1.50
- G
- 1.38
- Output Key
- 3/16 X 1.38
- Output Diameter (in)
- 0.875
- Service Factor
- 1
- Model Code
- 175U
- A
- 3.38
- Input Diameter (in)
- 0.625
- Gear Type
- Worm
- T
- 0.875
- Output Shaft Assembly Code
- L
- Mounting Style
- No Base
- Output RPM
- 58.3
- No. of Gear Reductions
- Single
- Cd
- 1.75
- Assembly
- U-L
- Ratio Range
- 30:1
- U
- 0.625
- I
- 2.75
- Center Distance Range
- 1" thru 3.25"
- Input HP @ 1750 RPM
- 0.63
- H Tap Size
- 5/16 - 18
- HP Range
- 1/2 to 3/4 HP (< 1)
- Output Torque Range
- 500 to 1000 in lbs
- Output Shaft Direction
- Left
- Output Torque Rating (in-lb)
- 614 in-lbs @1750 input RPM
- Overhung Load Rating (Output Shaft(lb))
- 740
- Output Shaft
- Solid Shaft
- Housing Material
- Cast Iron
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 175UL30
- Mfg. Part Numberi
- XD1007
- GDS #i
- GDS-122891
- Categoryi
- Right Angle Gearing
- UPCi
- 662288342632
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 175UL30?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 175UL30, manufacturer article number XD1007. Its UPC is 662288342632.
