Image differs from product
Right Angle Gearing
Morse 175UL50
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
B
4.81
N
4.31
Key Length
1.38
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- B
- 4.81
- N
- 4.31
- Key Length
- 1.38
- V
- 2.05
- K
- 2.09
- Input Speed
- 1750
- Reducer Style
- Standard
- X
- 0.63
- M
- 1.81
- H
- 2.06
- O
- 1.88
- C
- 5.75
- Shaft Seal Material
- Nitrile
- L
- 4.68
- J
- 4.19
- Key Sq.
- 0.1875
- Efficiency
- 80
- F
- 2.75
- Y
- 1.76
- D
- 2.06
- Ratio
- 50:1
- Max Thrust Load (Output Shaft)
- 1399
- H Depth
- 0.61
- Input Keyway
- 3/16 X 1.50
- Cd
- 1.75
- Output Diameter (in)
- 0.875
- Service Factor
- 1
- U
- 0.625
- Assembly
- U-L
- Input Style
- Solid Shaft
- Output RPM
- 35
- Input HP @ 1750 RPM
- 0.41
- E
- 2.09
- G
- 1.38
- Input Diameter (in)
- 0.625
- Product Type
- Worm Speed Reducer
- Model Code
- 175U
- Output Shaft Assembly Code
- L
- Center Distance (in)
- 1.75
- No. of Gear Reductions
- Single
- H Tap Size
- 5/16 - 18
- A
- 3.38
- Input RPM
- 1,750
- Gear Type
- Worm
- Reducer
- Worm - Right Angle
- Output Key
- 3/16 X 1.38
- Ratio Range
- 50:1
- Center Distance Range
- 1" thru 3.25"
- T
- 0.875
- Mounting Style
- No Base
- I
- 2.75
- Output Torque Range
- 500 to 1000 in lbs
- HP Range
- 1/2 to 3/4 HP (< 1)
- Output Shaft Direction
- Left
- Output Shaft
- Solid Shaft
- Housing Material
- Cast Iron
- Output Torque Rating (in-lb)
- 634 in-lbs @1750 input RPM
- Overhung Load Rating (Output Shaft(lb))
- 740
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 175UL50
- Mfg. Part Numberi
- XD1009
- GDS #i
- GDS-122893
- Categoryi
- Right Angle Gearing
- UPCi
- 662288342656
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 175UL50?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 175UL50, manufacturer article number XD1009. Its UPC is 662288342656.
