Image differs from product
Right Angle Gearing
Morse 175UR40
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
J
4.19
K
2.09
Input Speed
1750
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- J
- 4.19
- K
- 2.09
- Input Speed
- 1750
- N
- 4.31
- D
- 2.06
- O
- 1.88
- F
- 2.75
- Max Thrust Load (Output Shaft)
- 1399
- V
- 1.84
- Y
- 1.76
- H
- 2.06
- Key Length
- 1.38
- Efficiency
- 80
- M
- 1.81
- B
- 4.81
- X
- 0.63
- Reducer Style
- Standard
- Ratio
- 40:1
- C
- 5.75
- Key Sq.
- 0.1875
- L
- 4.68
- Shaft Seal Material
- Nitrile
- Center Distance Range
- 1" thru 3.25"
- Input RPM
- 1,750
- G
- 1.38
- Ratio Range
- 40:1
- Model Code
- 175U
- Output Shaft Assembly Code
- R
- Product Type
- Worm Speed Reducer
- Cd
- 1.75
- A
- 3.38
- Output Key
- 3/16 X 1.38
- Input HP @ 1750 RPM
- 0.52
- U
- 0.625
- Output RPM
- 43.7
- H Depth
- 0.61
- T
- 0.875
- I
- 2.75
- Output Diameter (in)
- 0.875
- No. of Gear Reductions
- Single
- H Tap Size
- 5/16 - 18
- Reducer
- Worm - Right Angle
- E
- 2.09
- Center Distance (in)
- 1.75
- Mounting Style
- No Base
- Gear Type
- Worm
- Assembly
- U-R
- Input Diameter (in)
- 0.625
- Input Style
- Solid Shaft
- Input Keyway
- 3/16 X 1.50
- Service Factor
- 1
- Output Torque Range
- 500 to 1000 in lbs
- HP Range
- 1/2 to 3/4 HP (< 1)
- Output Shaft Direction
- Right
- Housing Material
- Cast Iron
- Output Torque Rating (in-lb)
- 634 in-lbs @1750 input RPM
- Output Shaft
- Solid Shaft
- Overhung Load Rating (Output Shaft(lb))
- 740
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 175UR40
- Mfg. Part Numberi
- XD1018
- GDS #i
- GDS-122900
- Categoryi
- Right Angle Gearing
- UPCi
- 662288342724
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 175UR40?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 175UR40, manufacturer article number XD1018. Its UPC is 662288342724.
