Image differs from product
Morse 237Q56H10 107
RAIDER, UH, QH 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
56C
Max Thrust Load (Output Shaft)
1820
Reducer Style
Standard
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- Max Thrust Load (Output Shaft)
- 1820
- Reducer Style
- Standard
- D
- 2.88
- K
- 6.94
- F
- 1.44
- Input Bore (C Face)
- 0.625
- Input Keyway (C Face)
- 3/16 x 3/32
- Ratio
- 10:1
- Efficiency
- 80
- B
- 4.06
- H
- 2.5
- M
- 6
- N
- 3
- J
- 4.63
- P
- 4.88
- L
- 3.77
- R
- 3.25
- Motor Frame Size
- 56C
- C
- 5
- Input Speed
- 1750
- A
- 6.12
- Ratio Range
- 10:1
- Center Distance (in)
- 2.38
- E
- 2.5
- Input HP @ 1750 RPM
- 3.56
- Output Diameter (in)
- 1.500
- Frame Size
- 56C
- No. of Gear Reductions
- Single
- Mounting Style
- Shaft Mt
- Gear Type
- Worm
- Product Type
- Worm Speed Reducer
- Input Diameter (in)
- 0.625
- Center Distance Range
- 1" thru 3.25"
- Service Factor
- 1
- Input Style
- C-Face Quill
- HP Range
- 3HP (< 5)
- Output Torque Range
- 1000 to 2500 in lbs
- Output Shaft Direction
- L or R
- Output Torque Rating (in-lb)
- 1172 in-lbs @1750 input RPM
- Housing Material
- Cast Iron
- Overhung Load Rating (Output Shaft(lb))
- 1,770
- Output Shaft
- Hollow Bore
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 237Q56H10 107
- Mfg. Part Numberi
- XF1183
- GDS #i
- GDS-123204
- Categoryi
- Right Angle Gearing
- UPCi
- 662288696872
- Series Codei
- Raider
