Image differs from product
Morse 237Q56H20 107
RAIDER, UH, QH 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
56C
Input Speed
1750
K
6.94
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- Input Speed
- 1750
- K
- 6.94
- F
- 1.44
- C
- 5
- H
- 2.5
- R
- 3.25
- Reducer Style
- Standard
- Efficiency
- 80
- D
- 2.88
- L
- 3.77
- N
- 3
- P
- 4.88
- Ratio
- 20:1
- Motor Frame Size
- 56C
- M
- 6
- Max Thrust Load (Output Shaft)
- 2091
- Input Bore (C Face)
- 0.625
- Input Keyway (C Face)
- 3/16 x 3/32
- J
- 4.63
- B
- 4.06
- Input Diameter (in)
- 0.625
- Input Style
- C-Face Quill
- Center Distance (in)
- 2.38
- Frame Size
- 56C
- Ratio Range
- 20:1
- No. of Gear Reductions
- Single
- Mounting Style
- Shaft Mt
- Product Type
- Worm Speed Reducer
- Output Diameter (in)
- 1.500
- E
- 2.5
- Input HP @ 1750 RPM
- 2.33
- A
- 6.12
- Gear Type
- Worm
- Center Distance Range
- 1" thru 3.25"
- Service Factor
- 1
- HP Range
- 2HP (< 3)
- Output Torque Range
- 1000 to 2500 in lbs
- Output Shaft Direction
- L or R
- Overhung Load Rating (Output Shaft(lb))
- 1,770
- Output Torque Rating (in-lb)
- 1421 in-lbs @1750 input RPM
- Output Shaft
- Hollow Bore
- Housing Material
- Cast Iron
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 237Q56H20 107
- Mfg. Part Numberi
- XF1185
- GDS #i
- GDS-123206
- Categoryi
- Right Angle Gearing
- UPCi
- 662288579113
- Series Codei
- Raider
