Image differs from product
Right Angle Gearing
Morse 300UL60
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
J
7
M
2.26
Key Length
1.31
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- J
- 7
- M
- 2.26
- Key Length
- 1.31
- L
- 7
- H
- 3.25
- N
- 6.75
- Reducer Style
- Standard
- Y
- 2.26
- B
- 8.5
- Key Sq.
- 0.188
- Ratio
- 60:1
- Efficiency
- 80
- O
- 3.25
- K
- 3.5
- Max Thrust Load (Output Shaft)
- 3410
- X
- 0.88
- V
- 3.6
- D
- 3.25
- C
- 8.88
- Shaft Seal Material
- Nitrile
- F
- 4
- Input Speed
- 1750
- G
- 2
- H Tap Size
- 7/16 - 14
- Center Distance (in)
- 3
- H Depth
- 0.8
- Model Code
- 300U
- Input Diameter (in)
- 0.875
- Output RPM
- 29.1
- Product Type
- Worm Speed Reducer
- Cd
- 3
- E
- 3.5
- Output Shaft Assembly Code
- L
- Output Diameter (in)
- 1.250
- Ratio Range
- 60:1
- Assembly
- U-L
- Input Style
- Solid Shaft
- Input Keyway
- 3/16 X 1.31
- Center Distance Range
- 1" thru 3.25"
- Gear Type
- Worm
- A
- 5.5
- Mounting Style
- No Base
- No. of Gear Reductions
- Single
- T
- 1.25
- Input HP @ 1750 RPM
- 1.36
- I
- 4.5
- Service Factor
- 1
- Input RPM
- 1,750
- Output Key
- 1/4 X 2.25
- U
- 0.875
- Reducer
- Worm - Right Angle
- HP Range
- 1 to 1-1/2 (< 2)
- Output Torque Range
- 1000 to 2500 in lbs
- Output Shaft Direction
- Left
- Housing Material
- Cast Iron
- Output Torque Rating (in-lb)
- 2413 in-lbs @1750 input RPM
- Overhung Load Rating (Output Shaft(lb))
- 987
- Output Shaft
- Solid Shaft
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 300UL60
- Mfg. Part Numberi
- XH1010
- GDS #i
- GDS-123445
- Categoryi
- Right Angle Gearing
- UPCi
- 662288356813
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 300UL60?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 300UL60, manufacturer article number XH1010. Its UPC is 662288356813.
