Image differs from product
Right Angle Gearing
Morse 325Q140L20
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
140TC
C
9.38
L
5.02
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- C
- 9.38
- L
- 5.02
- K
- 3.75
- Max Thrust Load (Output Shaft)
- 3410
- V
- 3.66
- Input Keyway (C Face)
- 3/16 X 3/32
- Reducer Style
- Standard
- Ratio
- 20:1
- M
- 10.7
- O
- 3.25
- J
- 7.5
- R
- 3.25
- H
- 3.5
- N
- 7.06
- Efficiency
- 80
- Motor Frame Size
- 140TC
- Input Speed
- 1750
- B
- 8.5
- D
- 3.5
- Shaft Seal Material
- Nitrile
- F
- 4
- Input Bore (C Face)
- 0.875
- Input Style
- C-Face Quill
- E
- 3.75
- Assembly
- Q-L
- Center Distance Range
- 1" thru 3.25"
- H Tap Size
- 7/16 - 14
- Input Diameter (in)
- 0.875
- Output Diameter (in)
- 1.375
- AJ
- 5.88
- AK
- 4.5
- LQ
- 6.56
- Model Code
- 325Q
- Product Type
- Worm Speed Reducer
- Reducer
- Worm - Right Angle
- T
- 1.375
- BD
- 6.5
- Cd
- 3.25
- Center Distance (in)
- 3.25
- Output RPM
- 87.5
- Output Shaft Assembly Code
- L
- I
- 4.5
- No. of Gear Reductions
- Single
- H Depth
- 0.8
- Ratio Range
- 20:1
- Mounting Style
- No Base
- Frame Size
- 140TC
- BE
- 0.38
- Gear Type
- Worm
- G
- 2
- Input RPM
- 1,750
- Output Key
- 5/16 X 2.88
- BF
- 0.41
- A
- 5
- Input HP @ 1750 RPM
- 4.28
- Service Factor
- 1
- HP Range
- 5HP (< 7-1/2)
- Output Torque Range
- 2500 to 5000 in lbs
- Output Shaft Direction
- Left
- Housing Material
- Cast Iron
- Output Shaft
- Solid Shaft
- Output Torque Rating (in-lb)
- 3267 in-lbs @1750 input RPM
- Overhung Load Rating (Output Shaft(lb))
- 2,401
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325Q140L20
- Mfg. Part Numberi
- XI1155
- GDS #i
- GDS-123651
- Categoryi
- Right Angle Gearing
- UPCi
- 662288362050
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325Q140L20?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325Q140L20, manufacturer article number XI1155. Its UPC is 662288362050.
