Image differs from product
Right Angle Gearing
Morse 325Q140L25
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
140TC
H
3.5
Reducer Style
Standard
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- H
- 3.5
- Reducer Style
- Standard
- Input Speed
- 1750
- R
- 3.25
- J
- 6.14
- D
- 4
- C
- 7.5
- V
- 3.66
- Motor Frame Size
- 140TC
- B
- 5.75
- Ratio
- 25:1
- Efficiency
- 80
- N
- 7.06
- L
- 5.02
- K
- 9.38
- O
- 6.75
- Input Bore (C Face)
- 0.63
- Max Thrust Load (Output Shaft)
- 2574
- F
- 2
- Input Keyway (C Face)
- 3/16 X 1.63
- M
- 10.7
- Maximum Input HP
- 4.373 hp @ 1750 rpm
- Manufacturer Reducer Size
- 325
- Output Diameter (in)
- 1.375
- Product Type
- Worm Speed Reducer
- Mounting Style
- No Base
- Frame Size
- 140TC
- Input Style
- C-Face Quill
- Center Distance (in)
- 3.25
- Gear Type
- Worm
- Center Distance Range
- 1" thru 3.25"
- A
- 8.5
- Ratio Range
- 25:1
- No. of Gear Reductions
- Single
- Service Factor
- 1
- E
- 3.75
- Input HP @ 1750 RPM
- 4.373
- Input Diameter (in)
- 0.875
- Output Torque Range
- 2500 to 5000 in lbs
- HP Range
- 3HP (< 5)
- Output Shaft Direction
- Left
- Overhung Load Rating (Output Shaft(lb))
- 2,275
- Output Torque Rating (in-lb)
- 3360 in-lbs @1750 input RPM
- Housing Material
- Cast Iron
- Output Shaft
- Shaft
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325Q140L25
- Mfg. Part Numberi
- XI1156
- GDS #i
- GDS-123652
- Categoryi
- Right Angle Gearing
- UPCi
- 662288685937
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325Q140L25?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325Q140L25, manufacturer article number XI1156. Its UPC is 662288685937.
