Image differs from product
Right Angle Gearing
Morse 325Q140LR10
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
140TC
H
3.5
Input Keyway (C Face)
3/16 X 3/32
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- H
- 3.5
- Input Keyway (C Face)
- 3/16 X 3/32
- Reducer Style
- Standard
- J
- 7.5
- V
- 3.66
- Input Speed
- 1750
- L
- 5.02
- N
- 7.06
- D
- 3.5
- C
- 9.38
- Ratio
- 10:1
- Max Thrust Load (Output Shaft)
- 2964
- B
- 8.5
- F
- 4
- Shaft Seal Material
- Nitrile
- Motor Frame Size
- 140TC
- Input Bore (C Face)
- 0.875
- M
- 10.7
- K
- 3.75
- R
- 3.25
- Efficiency
- 80
- O
- 3.25
- Input Diameter (in)
- 0.875
- Frame Size
- 140TC
- Product Type
- Worm Speed Reducer
- AK
- 4.5
- Output Shaft Orientation
- LR
- Output RPM
- 175
- BD
- 6.5
- Cd
- 3.25
- AJ
- 5.88
- BF
- 0.41
- LQ
- 6.56
- Output Shaft Assembly Code
- D
- H Tap Size
- 7/16 - 14
- Output Key
- 5/16 X 2.88
- Mounting Style
- No Base
- Center Distance Range
- 1" thru 3.25"
- Gear Type
- Worm
- Input Style
- C-Face Quill
- Output Diameter (in)
- 1.375
- BE
- 0.38
- E
- 3.75
- Reducer
- Worm - Right Angle
- I
- 4.5
- Input RPM
- 1,750
- Center Distance (in)
- 3.25
- A
- 5
- O(asterisk)
- 3.25
- No. of Gear Reductions
- Single
- T
- 1.375
- Assembly
- Q-LR
- H Depth
- 0.8
- Input HP @ 1750 RPM
- 7.23
- G
- 2
- Ratio Range
- 10:1
- Service Factor
- 1
- Model Code
- 325Q
- HP Range
- 7-1/2 (< 10)
- Output Torque Range
- 2500 to 5000 in lbs
- Output Shaft Direction
- Double
- Output Torque Rating (in-lb)
- 2700 in-lbs @1750 input RPM
- Output Shaft
- Solid Shaft
- Housing Material
- Cast Iron
- Overhung Load Rating (Output Shaft(lb))
- 2,401
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325Q140LR10
- Mfg. Part Numberi
- XI1173
- GDS #i
- GDS-123665
- Categoryi
- Right Angle Gearing
- UPCi
- 662288362173
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325Q140LR10?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325Q140LR10, manufacturer article number XI1173. Its UPC is 662288362173.
