Image differs from product
Right Angle Gearing
Morse 325Q180L20
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
180TC
C
9.38
Input Speed
1750
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- C
- 9.38
- Input Speed
- 1750
- D
- 3.5
- Efficiency
- 80
- J
- 7.5
- L
- 5.02
- F
- 4
- Shaft Seal Material
- Nitrile
- N
- 7.06
- H
- 3.5
- K
- 3.75
- Reducer Style
- Standard
- O
- 3.25
- Max Thrust Load (Output Shaft)
- 3410
- M
- 10.7
- V
- 3.66
- B
- 8.5
- Ratio
- 20:1
- Input Keyway (C Face)
- 1/4 X 1/8
- R
- 4.5
- Input Bore (C Face)
- 1.125
- Motor Frame Size
- 180TC
- Assembly
- Q-L
- BE1
- 0.5
- G
- 2
- AK
- 8.5
- Model Code
- 325Q
- Service Factor
- 1
- H Tap Size
- 7/16 - 14
- LQ
- 7
- Input Diameter (in)
- 1.125
- T
- 1.375
- Ratio Range
- 20:1
- Frame Size
- 180TC
- I
- 4.5
- BD
- 9
- Output Shaft Assembly Code
- L
- E
- 3.75
- Input RPM
- 1,750
- Reducer
- Worm - Right Angle
- Output Diameter (in)
- 1.375
- Center Distance (in)
- 3.25
- Mounting Style
- No Base
- H Depth
- 0.8
- AJ
- 7.25
- Center Distance Range
- 1" thru 3.25"
- Output RPM
- 87.5
- Gear Type
- Worm
- Input Style
- C-Face Quill
- BF
- 0.53
- Output Key
- 5/16 X 2.88
- A
- 5
- No. of Gear Reductions
- Single
- Cd
- 3.25
- Product Type
- Worm Speed Reducer
- Input HP @ 1750 RPM
- 4.28
- HP Range
- 5HP (< 7-1/2)
- Output Torque Range
- 2500 to 5000 in lbs
- Output Shaft Direction
- Left
- Output Shaft
- Solid Shaft
- Overhung Load Rating (Output Shaft(lb))
- 2,401
- Housing Material
- Cast Iron
- Output Torque Rating (in-lb)
- 3267 in-lbs @1750 input RPM
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325Q180L20
- Mfg. Part Numberi
- XI1185
- GDS #i
- GDS-123673
- Categoryi
- Right Angle Gearing
- UPCi
- 662288362265
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325Q180L20?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325Q180L20, manufacturer article number XI1185. Its UPC is 662288362265.
