Image differs from product
Right Angle Gearing
Morse 325Q180LR10
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
Motor Frame Size
180TC
V
3.66
N
7.06
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- V
- 3.66
- N
- 7.06
- Max Thrust Load (Output Shaft)
- 2964
- Ratio
- 10:1
- Input Bore (C Face)
- 1.125
- Reducer Style
- Standard
- J
- 7.5
- Input Speed
- 1750
- O
- 3.25
- R
- 4.5
- B
- 8.5
- M
- 10.7
- Motor Frame Size
- 180TC
- C
- 9.38
- Input Keyway (C Face)
- 1/4 X 1/8
- Shaft Seal Material
- Nitrile
- D
- 3.5
- L
- 5.02
- F
- 4
- H
- 3.5
- Efficiency
- 80
- K
- 3.75
- No. of Gear Reductions
- Single
- Center Distance Range
- 1" thru 3.25"
- Reducer
- Worm - Right Angle
- Input HP @ 1750 RPM
- 7.23
- Product Type
- Worm Speed Reducer
- Frame Size
- 180TC
- Input Diameter (in)
- 1.125
- AJ
- 7.25
- Center Distance (in)
- 3.25
- T
- 1.375
- E
- 3.75
- Cd
- 3.25
- Mounting Style
- No Base
- BD
- 9
- Output Diameter (in)
- 1.375
- H Tap Size
- 7/16 - 14
- Assembly
- Q-LR
- Output Key
- 5/16 X 2.88
- Ratio Range
- 10:1
- Model Code
- 325Q
- H Depth
- 0.8
- Gear Type
- Worm
- AK
- 8.5
- Input Style
- C-Face Quill
- O(asterisk)
- 3.25
- Output RPM
- 175
- I
- 4.5
- Service Factor
- 1
- Output Shaft Orientation
- LR
- LQ
- 7
- BF
- 0.53
- G
- 2
- Output Shaft Assembly Code
- D
- BE1
- 0.5
- A
- 5
- Input RPM
- 1,750
- Output Torque Range
- 2500 to 5000 in lbs
- HP Range
- 7-1/2 (< 10)
- Output Shaft Direction
- Double
- Output Shaft
- Solid Shaft
- Overhung Load Rating (Output Shaft(lb))
- 2,401
- Output Torque Rating (in-lb)
- 2700 in-lbs @1750 input RPM
- Housing Material
- Cast Iron
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325Q180LR10
- Mfg. Part Numberi
- XI1203
- GDS #i
- GDS-123686
- Categoryi
- Right Angle Gearing
- UPCi
- 662288362388
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325Q180LR10?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325Q180LR10, manufacturer article number XI1203. Its UPC is 662288362388.
