Image differs from product
Right Angle Gearing
Morse 325UL15
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
D
3.5
Max Thrust Load (Output Shaft)
3364
O
3.25
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- D
- 3.5
- Max Thrust Load (Output Shaft)
- 3364
- O
- 3.25
- Reducer Style
- Standard
- Key Sq.
- 0.188
- N
- 7.06
- Shaft Seal Material
- Nitrile
- V
- 3.66
- K
- 3.75
- Input Speed
- 1750
- J
- 7.5
- L
- 7.06
- M
- 2.31
- Key Length
- 1.63
- Efficiency
- 80
- Ratio
- 15:1
- Y
- 2.38
- X
- 0.88
- C
- 9.38
- H
- 3.5
- B
- 8.5
- F
- 4
- Service Factor
- 1
- U
- 0.875
- Gear Type
- Worm
- Model Code
- 325U
- Product Type
- Worm Speed Reducer
- Output Diameter (in)
- 1.375
- Center Distance (in)
- 3.25
- Input RPM
- 1,750
- Input Style
- Solid Shaft
- G
- 2
- Mounting Style
- No Base
- A
- 5
- Ratio Range
- 15:1
- T
- 1.375
- Output Shaft Assembly Code
- L
- E
- 3.75
- Output Key
- 5/16 X 2.88
- H Depth
- 0.8
- Output RPM
- 116.6
- No. of Gear Reductions
- Single
- I
- 4.5
- Input Keyway
- 3/16 X 1.63
- Input Diameter (in)
- 0.875
- Assembly
- U-L
- Input HP @ 1750 RPM
- 5.42
- Cd
- 3.25
- Reducer
- Worm - Right Angle
- Center Distance Range
- 1" thru 3.25"
- H Tap Size
- 7/16 - 14
- Output Torque Range
- 2500 to 5000 in lbs
- HP Range
- 5HP (< 7-1/2)
- Output Shaft Direction
- Left
- Output Shaft
- Solid Shaft
- Output Torque Rating (in-lb)
- 2980 in-lbs @1750 input RPM
- Overhung Load Rating (Output Shaft(lb))
- 2,401
- Housing Material
- Cast Iron
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325UL15
- Mfg. Part Numberi
- XI1004
- GDS #i
- GDS-123608
- Categoryi
- Right Angle Gearing
- UPCi
- 662288361008
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325UL15?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325UL15, manufacturer article number XI1004. Its UPC is 662288361008.
