Image differs from product
Right Angle Gearing
Morse 325UL60
RAIDER, U, Q 1-3.25
Product Type
Worm Speed Reducer
L
7.06
D
3.5
X
0.88
Need help confirming fit? Send us the current part number, shaft size, housing photo, or equipment model.
Product Overview
- Rugged Cast-Iron Housing: Provides maximum strength and dependability.
- High lead angle worm is case hardened, ground and polished.
- Large, Single Row Ball Bearings On Input Shaft: Absorb radial and thrust loads at higher input speeds. Tapered roller bearings are used on output shaft.
- Forged Bronze Worm Gears: Provide optimum balance of Strength and Wear.
- L
- 7.06
- D
- 3.5
- X
- 0.88
- Max Thrust Load (Output Shaft)
- 3410
- Input Speed
- 1750
- M
- 2.31
- N
- 7.06
- F
- 4
- Y
- 2.38
- Efficiency
- 80
- O
- 3.25
- B
- 8.5
- J
- 7.5
- Key Length
- 1.63
- Shaft Seal Material
- Nitrile
- Reducer Style
- Standard
- C
- 9.38
- H
- 3.5
- V
- 3.66
- K
- 3.75
- Key Sq.
- 0.188
- Ratio
- 60:1
- Model Code
- 325U
- Input HP @ 1750 RPM
- 1.76
- Input Diameter (in)
- 0.875
- T
- 1.375
- Center Distance Range
- 1" thru 3.25"
- Service Factor
- 1
- E
- 3.75
- Reducer
- Worm - Right Angle
- Product Type
- Worm Speed Reducer
- A
- 5
- No. of Gear Reductions
- Single
- Input Style
- Solid Shaft
- H Tap Size
- 7/16 - 14
- U
- 0.875
- Gear Type
- Worm
- Input RPM
- 1,750
- Cd
- 3.25
- Center Distance (in)
- 3.25
- Output Diameter (in)
- 1.375
- Output RPM
- 29.1
- Output Shaft Assembly Code
- L
- Output Key
- 5/16 X 2.88
- Ratio Range
- 60:1
- Input Keyway
- 3/16 X 1.63
- H Depth
- 0.8
- Mounting Style
- No Base
- G
- 2
- Assembly
- U-L
- I
- 4.5
- HP Range
- 2HP (< 3)
- Output Torque Range
- 2500 to 5000 in lbs
- Output Shaft Direction
- Left
- Overhung Load Rating (Output Shaft(lb))
- 2,401
- Output Torque Rating (in-lb)
- 3274 in-lbs @1750 input RPM
- Output Shaft
- Solid Shaft
- Housing Material
- Cast Iron
Always verify dimensions, load ratings, material, and seal type before ordering.
- Brandi
- Morse
- Mfg. Catalog Numberi
- 325UL60
- Mfg. Part Numberi
- XI1010
- GDS #i
- GDS-123614
- Categoryi
- Right Angle Gearing
- UPCi
- 662288361053
- Series Codei
- Raider
Common Questions
Are volume discounts available for the 325UL60?
Yes. Published volume pricing for this part is shown in the volume pricing section on this page, and larger quantities can be quoted through a volume pricing request.
Is this a genuine Morse part?
Yes. GDS Supply supplies the genuine Morse 325UL60, manufacturer article number XI1010. Its UPC is 662288361053.
